Download Air Force Property: Identification & Management Exam and more Exams Advanced Education in PDF only on Docsity!
Material Controlling Block 2 Module 2
Exam
- Hazardous Material Identification Code (HMIC) - Correct Ans: โ
is only a flag to advise users that an item may be hazardous
- Chemical/Company information - Correct Ans: โ
general information about the chemical is located in this section of the SDS
- Hazardous Ingredients - Correct Ans: โ
section of the SDS is one of the most important parts of the safety sheet
- Health Hazard Data - Correct Ans: โ
The three principal routes of entry are inhalation, skin, and ingestion
- must verify that all hazardous items have an SDS - Correct Ans: โ
HAZMART
- National Stock Number NSN - Correct Ans: โ
is a 13 position alpha numeric identifier made up of Federal Supply Class and National Item Identification Number
- What are the first two positions of the NSN? - Correct Ans: โ
FSG
- What distinguishes concisely and permanently one item from
the other - Correct Ans: โ
NCB code/NIIN
- the ERRCD is assigned to items for - Correct Ans: โ
Management Purposes
- is a one position alpha code that identifies the ERRCD -
Correct Ans: โ
ERRC code
- What position of the ERRCD indicates the cost category to
which an item belongs? - Correct Ans: โ
third position
- Which position indicates highest level of repair and lowest
level of condemnation? - Correct Ans: โ
second position
- Three things Inspection can use to determine the identity
of an asset - Correct Ans: โ
stock number, part number reference number, item description or number
- Who insures all material receive stored issued or ship is properly identified and all information on the tags/labels is permanent and legible? - Correct Ans: โ
Inspectors
- What system was developed to provide Air Force personnel with a means to gather information on property by offering interactive cataloging - Correct Ans: โ
the D043A
- Technical Order - Correct Ans: โ
is a reference that maintenance personnel must use when they are installing or removing items from the previously mentioned end items
- How are TCTO kit stock numbers identified? - Correct
Ans: โ
By a K in the 5th position
- Where are TCTO items stored? - Correct Ans: โ
Flight Service Center
- Who will load a NPPC of 4 to the NSN for a TCTO item? -
Correct Ans: โ
the inspector
- What are unsuitable material assets that may have gone defective, arrived defective, serviceability is questionable, or have been flagged by manufacturer during testing called? - Correct Ans: โ
suspect/unsuitable
- What TRIC is used to load the suspect Material flag? -
Correct Ans: โ
(FCD) S
- What types of items are so sensitive and delicate in nature; they are easily ruined by something as minor as static electricity? - Correct Ans: โ
Electrostatic Sensitive Devices
- ESD items are so sensitive they are packed in three types
of packages: - Correct Ans: โ
Unit, Intermediate, and Exterior
- Who will ensure ESD items are properly marked/labeled and a type cargo card code (TCC) 3 is stored on the item record? - Correct Ans: โ
Inspection
- What is material whose identity has been deliberately
altered, misrepresented, or falsified? - Correct Ans: โ
Counterfeit Material
- in helping LRS inspectors readily identify these items, ___________ labels are attached to the containers of hazardous material. - Correct Ans: โ
Department of Transportation (Dot)
- How is IEX 9 loaded to an item record? - Correct Ans: โ
by using TRICC FCD and a 9 in The IEX card column
- identifies as the items that have been reviewed by DMS
and/or inspection but were assigned to IEX 9 - Correct Ans: โ
HHF
- Are fact sheets attached to hazardous material when received or issues summarizing area safety characteristics and measures of potentially hazardous? - Correct Ans: โ
SDS
- Federal Supply Group - Correct Ans: โ
the first two positions of the NSN, begins with 10 and continue through 99
- Federal Supply Class - Correct Ans: โ
the first four positions of the NSN
- National Codification Bureau Code/ National Item
Identification number (NCB Code/NIIN) - Correct Ans: โ
distinguishes an individual item of Supply quickly and permanently from all other items
- NCB Code - Correct Ans: โ
first two positions of NIIN (position 5-6)
- Material Management Aggregation Code (MMAC) -
Correct Ans: โ
is a to position alphabetic code assigned to each segment or category of material which is to be manage and reported as a separate logistics program
- Expendability, Recoverbility, Repairability, Cost
Designator (ERRCD) - Correct Ans: โ
is a 3 position alpha/numeric code that is assigned to items for management purposes/ is a key element in determining if an item is Manas as an expense or investment item
- Expendability (position 1) - Correct Ans: โ
weather in item may be consumed in use or may lose its original identity during periods of use
- Position 1 X - Correct Ans: โ
Expendable
- position 1 N - Correct Ans: โ
non-expendable
- level of repair (position 2) - Correct Ans: โ
indicates the highest level of repair allowed
- position 2 B - Correct Ans: โ
User
- position 2 F - Correct Ans: โ
Field
- position 2 D - Correct Ans: โ
Depot
- Maintenance Inspector - Correct Ans: โ
is a person authorized by maintenence function of an AF organization or activity
- Serviceable Tag Material, yellow borders and black letters
- Correct Ans: โ
DD Form 1574
- SCC Code J - Correct Ans: โ
Suspended (in stock)
- inspector will load a _________of 4 to the NSN - Correct
Ans: โ
NPPC
- inspection will ensure ESD items are properly marked labeled and a type cargo code _______ is stored on the item record - Correct Ans: โ
(TCC)
- Issue Exception Code IEX 9 - Correct Ans: โ
is loaded to an item record by using trick FCD and a 9 in the IEX card column
- Health Hazard Flag (HHF) - Correct Ans: โ
identifies the items that have been reviewed by distribution management system DMS and or inspection but were not assigned IEX 9
- Federal Standard 313 and the Federal Logistics
Information System (FLIS) - Correct Ans: โ
are two sources of information available to help identify potential hazardous items