Answer Key:
1-C, 2-B, 3-C, 4-B, 5-A, 6-B
SAMPLE QUESTIONS
The following are examples of the types of questions found on the ASE Entry-level Certification tests. Each test will
consist of a mixture of theory and applied diagnostic style questions. For test specifications, cut scores, task lists and
additional test information, please visit www.ASE.com/EntryLevel.
1. The ride height on the rear of a vehicle is found to be
too low. The best corrective action would be to:
A. replace the rear shocks.
B. install larger diameter rear tires.
C. replace the rear springs.
D. add helper springs.
2. The role of a stabilizer (anti-sway) bar is to:
A. prevent vibration.
B. control body roll.
C. prevent tire wear.
D. absorb noise.
3. A vehicle with front disc brakes shudders when the
brakes are applied. Which of these could be the cause?
A. Worn disc pads
B. A leaking grease seal
C. Warped brake rotors
D. A tight wheel bearing
4. How many amps will flow through a circuit with 3.3
ohms of resistance if 14.0 volts are applied?
A. 0.23 amps
B. 4.24 amps
C. 14.0 amps
D. 46.2 amps
5. The digital multimeter (DMM) shown in Diagram A is
measuring:
A. volts.
B. amps.
C. ohms.
D. watts.
6. Blue exhaust smoke can be caused by:
A. a clogged air filter.
B. worn piston rings.
C. worn main bearings.
D. a blown head gasket.
