Download Cisco ASR 1001-X Router License Verification and more Lecture notes Computer Systems Networking and Telecommunications in PDF only on Docsity!
This chapter provides information about verifying the Cisco IOS license level, viewing the Cisco ASR 1001-X Router license, and configuring the throughput level. This chapter contains the following sections:
- Viewing the Cisco IOS License Level, page 1
- Configuring the Throughput Level, page 2
- Viewing License Information, page 3
- Per Port Counted License (10-GE Interfaces), page 9
Viewing the Cisco IOS License Level
Use the show version command to determine the Cisco IOS license level in the router. For example: Router# show version . . . License Level: adventerprise License Type: RightToUse Next reload license Level: adventerprise . Table 1: show version Command Output Description
Field Name Description License Level: adventerprise Indicates the current Cisco IOS license code level.
Cisco ASR 1001-X Router Hardware Installation Guide
Field Name Description Indicates whether you are utilizing a permanent (purchased) license, an evaluation 60-day license, or a Right-to-Use license that would indicate that the purchase of a license is required.
License Type: RightToUse
Indicates the startup configuration definition that will be used for the next reload instance.
Next reload license Level: adventerprise
Use the show running-config command or the show startup-config command to view the license-level information. The following example displays sample output from the show running-config command: Router# show running-config . . . license boot level adventerprise . . Table 2: show running-config Command Output Description Field Name Description Indicates the current requested Cisco lOS license level to boot.
license boot level adventerprise
Configuring the Throughput Level
The built-in embedded service processor of the Cisco ASR 1001-X Router supports throughputs of 2.5 Gbps (default), 5 Gbps, 10 Gbps, and 20 Gbps depending upon the software license. You can upgrade the throughput of the ESP from 2.5 Gbps (default) to 5 Gbps, 10 Gbps, or 20 Gbps by applying a software-activated performance upgrade license and then reloading the router. You can upgrade the throughput of the ESP from any license level to another. To determine the current throughput level of the ESP, run the show platform hardware throughput level command. The following example shows the output from this command after you apply the 20 Gbps performance upgrade license and reload the router: Router# show platform hardware throughput level The current throughput level is 2000000 kb/s After the router is reloaded, the log messages at the router startup will display the license-level and throughput-level information, for example:
Cisco ASR 1001-X Router Hardware Installation Guide
Configuring the Throughput Level
You can also determine the UDI information using the show running-config command, for example: Router# show running-config . . . license udi pid ASR1001-X sn myroutersn Table 3: show running-config Command Output Description
Field Name Description License identifier information (also displayed with the show license udi command).
license udi pid ASR1001-X sn myroutersn
Use the show license all command to display all the applicable licenses in both Primary License Storage and Built In License Storage.
Note Primary License Storage stores the currently purchased and installed licenses. The following example displays sample output from the show license all command: router# show license all License Store: Primary License Storage StoreIndex: 0 Feature: interface_10g Version: 1. License Type: Permanent License State: Active, In Use Lock type: Node locked Vendor info: ASR1001-XJAE17450EUZ License Addition: Exclusive License Generation version: 0x License Count: 2/0/0 (Active/In-use/Violation) License Priority: Medium License Store: Built-In License Storage StoreIndex: 0 Feature: adventerprise Version: 1. License Type: RightToUse License State: Active, In Use Lock type: Non Node locked Vendor info: NOTLOCKEDNOTLOCKEDRTU License Addition: Additive License Generation version: 0x
Cisco ASR 1001-X Router Hardware Installation Guide
Viewing License Information
License Count: Non-Counted License Priority: Low StoreIndex: 1 Feature: advipservices Version: 1. License Type: EvalRightToUse License State: Active, Not in Use, EULA not accepted Evaluation total period: 8 weeks 4 days Evaluation period left: 8 weeks 4 days Period used: 0 minute 0 second Lock type: Non Node locked Vendor info: NOTLOCKEDNOTLOCKEDRTU License Addition: Additive License Generation version: 0x License Count: Non-Counted License Priority: None StoreIndex: 2 Feature: avc Version: 1. License Type: EvalRightToUse License State: Active, Not in Use, EULA not accepted Evaluation total period: 8 weeks 4 days Evaluation period left: 8 weeks 4 days Period used: 0 minute 0 second Lock type: Non Node locked Vendor info: NOTLOCKEDNOTLOCKEDRTU License Addition: Additive License Generation version: 0x License Count: Non-Counted License Priority: None StoreIndex: 3 Feature: fwnat_red Version: 1. License Type: EvalRightToUse License State: Active, Not in Use, EULA not accepted Evaluation total period: 8 weeks 4 days Evaluation period left: 8 weeks 4 days Period used: 0 minute 0 second Lock type: Non Node locked Vendor info: NOTLOCKEDNOTLOCKEDRTU License Addition: Additive License Generation version: 0x
Cisco ASR 1001-X Router Hardware Installation Guide
Viewing License Information
License Count: Non-Counted License Priority: None StoreIndex: 7 Feature: otv Version: 1. License Type: EvalRightToUse License State: Active, Not in Use, EULA not accepted Evaluation total period: 8 weeks 4 days Evaluation period left: 8 weeks 4 days Period used: 0 minute 0 second Lock type: Non Node locked Vendor info: NOTLOCKEDNOTLOCKEDRTU License Addition: Additive License Generation version: 0x License Count: Non-Counted License Priority: None StoreIndex: 8 Feature: sw_redundancy Version: 1. License Type: EvalRightToUse License State: Active, Not in Use, EULA accepted Evaluation total period: 8 weeks 4 days Evaluation period left: 7 weeks 5 days Period used: 5 days 2 hours Lock type: Non Node locked Vendor info: NOTLOCKEDNOTLOCKEDRTU License Addition: Additive License Generation version: 0x License Count: Non-Counted License Priority: Low StoreIndex: 9 Feature: throughput_5g Version: 1. License Type: RightToUse License State: Active, In Use Lock type: Non Node locked Vendor info: NOTLOCKEDNOTLOCKEDRTU License Addition: Additive License Generation version: 0x License Count: Non-Counted License Priority: Low StoreIndex: 10 Feature: throughput_10g Version: 1.
Cisco ASR 1001-X Router Hardware Installation Guide
Viewing License Information
License Type: EvalRightToUse License State: Active, Not in Use, EULA not accepted Evaluation total period: 8 weeks 4 days Evaluation period left: 8 weeks 4 days Period used: 0 minute 0 second Lock type: Non Node locked Vendor info: NOTLOCKEDNOTLOCKEDRTU License Addition: Additive License Generation version: 0x License Count: Non-Counted License Priority: None StoreIndex: 11 Feature: throughput_20g Version: 1. License Type: EvalRightToUse License State: Active, Not in Use, EULA not accepted Evaluation total period: 8 weeks 4 days Evaluation period left: 8 weeks 4 days Period used: 0 minute 0 second Lock type: Non Node locked Vendor info: NOTLOCKEDNOTLOCKEDRTU License Addition: Additive License Generation version: 0x License Count: Non-Counted License Priority: None StoreIndex: 12 Feature: vpls Version: 1. License Type: EvalRightToUse License State: Active, Not in Use, EULA not accepted Evaluation total period: 8 weeks 4 days Evaluation period left: 8 weeks 4 days Period used: 0 minute 0 second Lock type: Non Node locked Vendor info: NOTLOCKEDNOTLOCKEDRTU License Addition: Additive License Generation version: 0x License Count: Non-Counted License Priority: None StoreIndex: 13 Feature: interface_10g Version: 1.
Cisco ASR 1001-X Router Hardware Installation Guide
Viewing License Information
Evaluation total period: 8 weeks 4 days Evaluation period left: 8 weeks 1 day Period used: 2 days 8 hours Lock type: Non Node locked Vendor info: NOTLOCKEDNOTLOCKEDRTU License Addition: Additive License Generation version: 0x License Count: 0/0 (In-use/Violation) License Priority: Low StoreIndex: 13 Feature: interface_10g Version: 1. License Type: EvalRightToUse License State: Active, In Use Evaluation total period: 8 weeks 4 days Evaluation period left: 2 weeks 6 days Period used: 5 weeks 4 days Transition date: Jun 09 2014 05:14: Lock type: Non Node locked Vendor info: NOTLOCKEDNOTLOCKEDRTU License Addition: Additive License Generation version: 0x License Count: 2/0 (In-use/Violation) License Priority: Low Table 5: show license all Command Output Description
Field Name Description License Count: 0/0 (In-use/Violation) No 10-GE ports in use for the evaluation license. Two 10-GE ports in use for the evaluation license (a EULA was accepted for each prior to use).
License Count: 2/0 (In-use/Violation)
10-GE Interface Evaluation License Features
The following are the features of the 10-GE Interface Evaluation license:
- There is only one 60-Day Evaluation Period countdown timer for both 10-GE ports. The timer is initiated as soon as the first of the two ports is enabled.
- A EULA will be presented, and must be accepted, the first time you enable either of the two ports in order to utilize the requested port.
Cisco ASR 1001-X Router Hardware Installation Guide
10-GE Interface Evaluation License Features
- When the 60-Day Evaluation Period expires, the license automatically changes to an RTU license. As with all other RTU licenses, there is no functionality disruption or accessibility concerns following this transition.
- There can be only one active interface_10g license. Either the Permanent License or the EvalRTU License can be Active, but not both.
- As with past license implementations, the Permanent license is of higher precedence than the built-in EvalRTU license. However, when the Permanent license does not have enough port-count (that is, when the user requests both built-in 10GE ports but the Permanent License only allows for one port), the license priority changes between the Permanent and Evaluation licenses. In this case, the Evaluation License becomes Active since it can accommodate both ports. The Permanent License will automatically become Active if and when its port-count meets the user’s desired configuration.
Cisco ASR 1001-X Router Hardware Installation Guide
10-GE Interface Evaluation License Features
