Download Defense Basic Preservation and Packing Exam: Multiple Choice Questions and Answers and more Exams Logistics in PDF only on Docsity!
DEFENSE BASIC PRESERVATION AND
PACKING EXAM | ALL QUESTIONS AND
CORRECT ANSWERS | ALREADY
GRADED A+ | LATEST EXAM | VERIFIED
ANSWERS
You're packaging several small, sturdy, lightweight items in one box, What is the most cost-effective method for keeping them separated and protected? ---------CORRECT ANSWER-----------------fiberboard partitions This type of item can withstand significant impact without damage, so it is often blocked and braced, but may not need cushioning. ---------CORRECT ANSWER-----------------rugged You're attempting to pack a large, awkward item that would be much easier to ship if it was partially disassembled. Which action should you take? ------- --CORRECT ANSWER-----------------Get permission from the proper authority to disassemble the item Which cushioning method is used for sensitive electronics shipped in racks or transport cases? ---------CORRECT ANSWER----------------- suspension/shock mounts Which cushioning method is often used for consumer electronic items when a full floated package is not cost-effective? ---------CORRECT ANSWER----- ------------side pads
Which marking identifies the military shipment label (MSL)? --------- CORRECT ANSWER-----------------C Which publication provides general standards for outer container markings? ---------CORRECT ANSWER-----------------MIL-STD- 129 Which marking is NOT included on the outer container label? --------- CORRECT ANSWER-----------------item nomenclature You are shipping a large DoD container. What special tagging is required for global tracking? ---------CORRECT ANSWER-----------------Radio Frequency Identification (RFID) What special marking uses a three-position alphanumeric code to expedite critical shipments? ---------CORRECT ANSWER-----------------Project Code Which bar code must include human-readable interpretation (HRI) markings? ---------CORRECT ANSWER-----------------Linear Bar Code The labels shown here provide guidance on a shipment's specific handling needs. They are known as ---------CORRECT ANSWER----------------- Special markings
number in MIL-STD-147 Table B-I? ---------CORRECT ANSWER-------------- ---Length and width Areas shaded black on a load pattern represent empty areas that --------- CORRECT ANSWER-----------------must be filled with stability dunnage Which of these pallet loads has an overhang? ---------CORRECT ANSWER-----------------the one with the black cylinders Which of these images shows edge protectors? ---------CORRECT ANSWER-----------------the one with the white protectors Which of these images shows a collar? ---------CORRECT ANSWER--------- --------the orange tubes You are loading a pallet. Where do you look up load type and its preferred stability dunnage and bonding method? ---------CORRECT ANSWER--------- --------MIL-STD-147, Appendix A Which of the following bonding methods secures the load to the pallet? ----- ----CORRECT ANSWER-----------------Method D: Tie-down straps A palletized load weighs 600 pounds and requires 6 tie-down straps. To keep the load from falling apart during handling and transit, you must use strapping material with a breaking strength of at least ---------CORRECT ANSWER-----------------100 pounds
Which strap is the first to be applied to the palletized load? --------- CORRECT ANSWER-----------------The black one Which structure is installed before loading cargo into an end-opening ISO container? ---------CORRECT ANSWER-----------------Front-blocking assembly You have to load a side-opening ISO container with loaded 40 x 48 inch pallets. Which pallet unit number should you use? ---------CORRECT ANSWER-----------------Pallet Unit No. 11 What is considered a general guideline when loading a palletized ISO container load? ---------CORRECT ANSWER-----------------Block and brace according to load requirements and applicable load drawings Which blocking and bracing method prevents an ISO container load from moving up and down? ---------CORRECT ANSWER-----------------Vertical A variety of materials are used to support and prevent the movement of palletized ISO container loads. What is the most common material used? -- -------CORRECT ANSWER-----------------Lumber What is the first step in the loading sequence for a side-opening ISO container? ---------CORRECT ANSWER-----------------Assemble front- blocking units
Which of these is NOT on the dangerous goods list? ---------CORRECT ANSWER-----------------Perishable food products You have a package approved for non-military shipment. It weighs 68 pounds and has a combined length plus girth that is 115 inches. Can you ship it via standard USPS? ---------CORRECT ANSWER-----------------No, the length plus girth is over the limit The ASTM D4727 industry standard divides fiberboard into corrogated and ---------CORRECT ANSWER-----------------solid You need a fiberboard box for packing. It does not need to be weather, water, watervapor, or fire resistant. Which box class should you choose? --- ------CORRECT ANSWER-----------------D What are the three varieties of corrugated fiberboard? ---------CORRECT ANSWER-----------------Singlewall Doublewall Triplewall You are using a fiberboard box for packing. To avoid waster, you selected the appropriate grade. What does grade measure? ---------CORRECT ANSWER-----------------Strength and durability These fiberboard boxes are all classed as domestic. Which one is the strongest? ---------CORRECT ANSWER-----------------Corrugated Triplewall Grade 700
Your packaging shop has a stockpile of vendor-made, fiberboard boxes. You need to know their specifications, so you read their ---------CORRECT ANSWER-----------------box maker's certificate You need to secure a light-duty fiberboard box. Which manufacturer's joint would you use? ---------CORRECT ANSWER-----------------Taped You need to pack a heavy item for shipment. Before you put it in the box, you realize the box needs another layer of fiberboard to strengthen its sides. What do you put inside the box? ---------CORRECT ANSWER---------- -------Liner When packing a fiberboard box for shipment, you refer to ASTM D because it contains standards for ---------CORRECT ANSWER----------------- closing, sealing, and reinforcement methods You have a larder, heavy fiberboard box that needs to be strapped. To make sure you add enough straps to reinforce the box, you need to know the box's ---------CORRECT ANSWER-----------------length, height, and width What happens when one part of a wooden board dries faster than another and causes a stress that changes the shape of the wood? --------- CORRECT ANSWER-----------------Warping
You are constructing a wood container and you notice a small section of decay. What should you do? ---------CORRECT ANSWER----------------- Discard the decayed piece The structural integrity and stability of a wooden container depends a lot on nail retention. You should avoid nailing into the ---------CORRECT ANSWER-----------------end grain Which box component strengthens and supports the framework of a wooden box? ---------CORRECT ANSWER-----------------cleat Which publication do you use to build lumber boxes? ---------CORRECT ANSWER-----------------ASTM D Which class of wood-cleated panelboard box has a higher weight limit and is better suited to rough handling and unprotected storage? --------- CORRECT ANSWER-----------------Class 2 Which publication do you use to build wood-cleated panelboard boxes? ---- -----CORRECT ANSWER-----------------ASTM D You need to ship a 280 lb. load of ammunition to a location with hazardous conditions and millitary contingencies. Which class of wirebound wood box should you use? ---------CORRECT ANSWER-----------------Class 3
Which type of wooden box is best suited for light duty? ---------CORRECT ANSWER-----------------simplest looking box The item you're shipping will be stored outside in a wet climate for extended periods of time. Which type of box treatment is needed to resist water damage? ---------CORRECT ANSWER-----------------Treatment B Which type of wooden box can withstand rough handling, and is often used for ammunition and ordnance? ---------CORRECT ANSWER----------------- box with words on side What's the maximum intermediate cleat spacing allowed for a wood-cleated panelboard box? ---------CORRECT ANSWER-----------------24 inches You may deviate from ASTM wooden box construction standards only when ---------CORRECT ANSWER-----------------the deviation results in a stronger box You need to know more about some wirebound boxes that arrived in your packaging shop. Which publication would you use? ---------CORRECT ANSWER-----------------ASTM D Which picture highlights the diagonal members of a crate? --------- CORRECT ANSWER-----------------yellow diagonal wood piece
You are building an ASTM D7478 crate. Which item measurement do you use to determine whether to use Type A, B, or C panels? ---------CORRECT ANSWER-----------------height Which type of crate requires you to drill holes for ventilation? --------- CORRECT ANSWER-----------------lumber-sheathed Which is a kraft envelope? ---------CORRECT ANSWER-----------------brown envelope Which tube has the most secure top? ---------CORRECT ANSWER------------ -----the tube with a screw top Which is the telescoping tube? ---------CORRECT ANSWER----------------- the blue one Which is the closed head steel drum? ---------CORRECT ANSWER----------- ------tall drum with light blue lid Which is the lug cover pail? ---------CORRECT ANSWER-----------------the grey one Which is a Style 2 metal drum ---------CORRECT ANSWER-----------------the one with a ring
Which Fast-Pack is used for large electronic components like amplifies and power supplies? ---------CORRECT ANSWER-----------------Telescoping encapsulated Which Fast-Pack is used for small electronic components like circuit boards? ---------CORRECT ANSWER-----------------folding convoluted You need to ship a set of large blueprints across the U.S. Which type of specialized container would you use? ---------CORRECT ANSWER----------- ------Mailing tube You need to ship industrial solvent. Which type of specialized container would you use? ---------CORRECT ANSWER-----------------steel shipping pail Which is a Style 1 drum? ---------CORRECT ANSWER-----------------small shiny drum Which is the paper cuff end tube? ---------CORRECT ANSWER----------------
- 3 tube picture Which is the padded envelope? ---------CORRECT ANSWER----------------- yellow envelope
This type of item can withstand significant impact without damage, so it is often blocked and braced, but may not need cushioning. ---------CORRECT ANSWER-----------------rugged You're attempting to pack a large, awkward item that would be much easier to ship if it was partially disassembled. Which action should you take? ------- --CORRECT ANSWER-----------------Get permission from the proper authority to disassemble the item Which cushioning method is used for sensitive electronics shipped in racks or transport cases? ---------CORRECT ANSWER----------------- suspension/shock mounts Which cushioning method is often used for consumer electronic items when a full floated package is not cost-effective? ---------CORRECT ANSWER----- ------------side pads Which marking identifies the military shipment label (MSL)? --------- CORRECT ANSWER-----------------C Which publication provides general standards for outer container markings? ---------CORRECT ANSWER-----------------MIL-STD- 129 Which marking is NOT included on the outer container label? --------- CORRECT ANSWER-----------------item nomenclature
You are shipping a large DoD container. What special tagging is required for global tracking? ---------CORRECT ANSWER-----------------Radio Frequency Identification (RFID) What special marking uses a three-position alphanumeric code to expedite critical shipments? ---------CORRECT ANSWER-----------------Project Code Which bar code must include human-readable interpretation (HRI) markings? ---------CORRECT ANSWER-----------------Linear Bar Code The labels shown here provide guidance on a shipment's specific handling needs. They are known as ---------CORRECT ANSWER----------------- Special markings What is the most common size of a pallet? ---------CORRECT ANSWER----- ------------40 x 48 inches Which of these is a 4-way entry, double wing, stringer pallet? --------- CORRECT ANSWER-----------------the lighter one with the edges hanging over Which of these is a 2-way entry, double wing, blocked pallet? --------- CORRECT ANSWER-----------------the darker one with the edges hanging over
Which of these images shows a collar? ---------CORRECT ANSWER--------- --------the orange tubes You are loading a pallet. Where do you look up load type and its preferred stability dunnage and bonding method? ---------CORRECT ANSWER--------- --------MIL-STD-147, Appendix A Which of the following bonding methods secures the load to the pallet? ----- ----CORRECT ANSWER-----------------Method D: Tie-down straps A palletized load weighs 600 pounds and requires 6 tie-down straps. To keep the load from falling apart during handling and transit, you must use strapping material with a breaking strength of at least ---------CORRECT ANSWER-----------------100 pounds Which strap is the first to be applied to the palletized load? --------- CORRECT ANSWER-----------------The black one Which structure is installed before loading cargo into an end-opening ISO container? ---------CORRECT ANSWER-----------------Front-blocking assembly You have to load a side-opening ISO container with loaded 40 x 48 inch pallets. Which pallet unit number should you use? ---------CORRECT ANSWER-----------------Pallet Unit No. 11
What is considered a general guideline when loading a palletized ISO container load? ---------CORRECT ANSWER-----------------Block and brace according to load requirements and applicable load drawings Which blocking and bracing method prevents an ISO container load from moving up and down? ---------CORRECT ANSWER-----------------Vertical A variety of materials are used to support and prevent the movement of palletized ISO container loads. What is the most common material used? -- -------CORRECT ANSWER-----------------Lumber What is the first step in the loading sequence for a side-opening ISO container? ---------CORRECT ANSWER-----------------Assemble front- blocking units You must load a side-opening ISO container with loaded pallets measuring 43 1/2 x 51 inches long. Which is the best way to determine what pallet unit number to use? ---------CORRECT ANSWER-----------------Refer to load drawings for a side-opening ISO container Which blocking and bracing method prevents an ISO container load from moving side to side? ---------CORRECT ANSWER-----------------Lateral Using load drawings, you followed the sequenced loading process for an end-opening container. What is the last step in the process? --------- CORRECT ANSWER-----------------Assemble rear blocking
