Download Dell Client Advanced Questions and Answers and more Exams Computer Science in PDF only on Docsity!
Dell Client Advanced (Latest Update) Questions
and Verified Answers (GRADED A)
When the side cover of Precision Tower 7920 is not assembled, the system will still power on. False On Latitude 14 Rugged Extreme - 7414, which light is used to communicate error using Single LED? not Power light We Import a Foreign configuration in a RAID Array, if: The array containing foreign configuration is in an Offline state Select statements that are true about Trusted Platform Module (TPM) not The Trusted Platform Module (TPM) is used to generate and store keys After completing a service incident on a Precision Tower 7920, technician attempts to run ePSA before re-assembling the side cover. However, system is not able to power on and displays LED error code of 4-
- What could be the issue? The intrusion switch is triggered and power is cut-off. Install the side cover to de-activate the intrusion switch. Before replacing any hardware, what is the recommended solution for the BSOD or system freezing? not Reseat the DIMMs
If an Edge Gateway is Blinking green after the diagnostics, what does it indicate? ePSA Pass On a Precision Workstation, if a Hard drive status indicator flashes green, amber and then turns off; this indicates the drive is rebuilding False In general, an Anti-Static Mat is used to prevent Electrostatic damage True Onsite Services for Ruggedized Notebooks are limited to CRU parts and Service Assembly Parts. True How many thermal performance control modes are there in Alienware Area 51m to support different user scenarios? not 1. We have an expert-written solution to this problem! Overclocking is the process of making a computer or component in a computer operate faster than specified by the manufacturer by modifying the system parameters True In a PERC H730P controller, P stands for Performance
What steps must be taken if there is a fan-related error message displayed at the Start up, but the system boots to the OS? not Check for Dust or debris on the Fans, clean them The following items are unaffected by the RTC reset: not Service Tag Which screwdriver is recommended for removing PHM (Processor Heat Sink module) used on a Precision Rack 7920? Torx #T USB Service Key is used for Windows OS installation and debranding (for OEM) in an Edge Gateway True Tobii eye-tracker module enables user to perform the following: not Interact intelligently with their computers Which keyboard key is used in an Edge Gateway 3000 series to start ePSA? not F What is not an example for IoT application? not Wearable gadgets
The Edge Gateway 3000 series support the following power sources: not 3-pin DC - IN Select all the LED codes for Memory related issues in a Dell Edge Gateway 2, 2, 2, NIC Activity LED is off and Link indicator is green. This indicates NIC is connected to a valid network at its maximum port speed but data isn't being sent/received True BOSS stands for: not Boot Optimized Server Subsystem Which indicator shows whether power is present or a power fault has occurred in Precision Workstation systems? not AC PSU LED We have an expert-written solution to this problem! In a Precision Rack, one PSU is faulty and other one is fine. After hot plugging the new PSU, it starts to blink green and turns off. What do you think is the cause? PSU has Firmware/Voltage mismatch
Which RAID mirrors the data between the two drives without parity? RAID 1 In an Alienware Notebook, which indicator is used to communicate error codes? Power button or battery LED In Alienware systems, errors are indicated via the tricolor Power Button LED. False After completing a service incident on a Precision Tower 7920, technician attempts to run ePSA before re-assembling the side cover. However, system is not able to power on and displays LED error code of 4-
- What could be the issue? The intrusion switch is triggered and power is cut-off. Install the side cover to de-activate the intrusion switch. Which RAID is defined as Striped set without Parity? RAID 0 The Easy Restore feature to restore Service tag, licenses, UEFI configuration is available in Rugged Latitude False
Select all the guidelines that have to be followed when working in a Data Center Environment Only access racks that contain the equipment you are assigned to troubleshoot Communicate any problems to the Data Center staff No food or drinks allowed in the Data Center Check all that applies when troubleshooting PSU issue in a Dell Precision Rack PSU indicator will not illuminate if the power is not connected AC PSU indicator will be blinking green during a Firmware update AC PSU indicator blinks green five times at a rate of 4 Hz and turns off to indicate PSU mismatch In the latest Precision Rack, the iDRAC Enterprise license is available by default False
