























Study with the several resources on Docsity
Earn points by helping other students or get them with a premium plan
Prepare for your exams
Study with the several resources on Docsity
Earn points to download
Earn points by helping other students or get them with a premium plan
Community
Ask the community for help and clear up your study doubts
Discover the best universities in your country according to Docsity users
Free resources
Download our free guides on studying techniques, anxiety management strategies, and thesis advice from Docsity tutors
EVITP Certification Practice Test 2025 with QUESTIONS AND CORRECT ANSWERS| ACCURATE REAL EXAM WITH FREQUENTLY TESTED QUESTIONS|ALREADY A GRADED|GUARANTEED PASS|LATEST UPDATE 2025/Electric Vehicle Infrastructure Training Program Exam 2025 (New!)
Typology: Exams
1 / 31
This page cannot be seen from the preview
Don't miss anything!
The state of charge is the available capacity of the battery, expressed as a percentage. Select one: True False - CORRECT ANSWER- True
Which of the following is not an alternative to fossil fuels? Select one: a.Compressed air b.Electricity c.Fuel cell d.Gasoline - CORRECT ANSWER- d.Gasoline
The first electric vehicle can be traced back to?.
Select one: a. b. c. d.2002 - CORRECT ANSWER- a. 1832
Which of the following illustrates why electric vehicles were so popular in the early days of automobiles? Select one: a.They were clean to operate. b.They were mechanically complicated. c.They were quiet. d.Both a. and c. - CORRECT ANSWER- d.Both a. and c.
What factors limited the popularity of EVs as internal combustion engine vehicles came to the market in the early 1900s? Select one: a.Charge times b.Range c.Speed d.All of the above - CORRECT ANSWER- d.All of the above
What improvements in technology have increased interest in EVs? Select one: a.Charging stations specific to each type of vehicle b.High cost and poor public awareness c.Improved range, power, and lighter batteries d.None of the above - CORRECT ANSWER- c.Improved range, power, and lighter batteries
What best describes early EVs? Select one: a.Loud and difficult to steer b.Oily, noisy, and hard to start c.Quiet, easy to start, and mechanically simple d.Very unreliable - CORRECT ANSWER- c. Quiet, easy to start, and mechanically simple
Which of the following is not a category of electric vehicles? Select one: a.BEV b.HEV c.ICE
d.PHEV - CORRECT ANSWER- c.ICE
What category of EV has been available to consumers the longest? a.BEV b.HEV c.PHEV d.All of the above - CORRECT ANSWER- b.HEV
Which of the following describes a plug-in electric vehicle that runs on batteries until nearly depleted, then switches over to an ICE generator to extend the battery range? Select one: a.BEV b.PHEV c.All electric vehicles have this capability. d.No electric vehicle currently on the market has this capability. - CORRECT ANSWER- b.PHEV
Regenerative braking is best described by which of the following? Select one: a.An energy recovery system b.Not reliable as a braking method c.Obsolete technology that existed on EV models in the 1990s
c.Wireless power transfer d.All of the above - CORRECT ANSWER- d.All of the above
Fleet vehicle battery capacity has reached upward of? for heavy duty vehicles. Select one: a.500 Wh b.10 kWh c.550 kWh d.none of the above - CORRECT ANSWER- c.550 kWh
Charging is defined as which of the following? Select one: a.Refilling brake fluid in an EV b.Removing the batteries from an EV and placing them inside charging equipment c.Replacing batteries in an EV d.Supplying power (kW) to an EV battery - CORRECT ANSWER- d.Supplying power (kW) to an EV battery
The first EV chargers were external and supplied DC current directly to the vehicle's batteries. Select one: a.True
b.False - CORRECT ANSWER- a.True
Which of the following was an early electric vehicle charger? Select one: a.City of Seattle's Electro-Park electrified parking space b.Ford Dyna-Charge c.General Electric arc rectifier d.Tesla Model 001 Charger - CORRECT ANSWER- c.General Electric arc rectifier
Later in the development of EV charging equipment, the actual charging means was accomplished by a(n)? that converts AC to DC to be used in charging the vehicle's battery. Select one: a.internal combustion generator b.inverter c.rectifier d.voltage source - CORRECT ANSWER- c.rectifier
Electric vehicle supply equipment (EVSE) provides which of the following safety features? Select one: a.A continuously energized output b.GFCI protection
The purpose of the J1772 connector pins is to provide?. Select one: a.a charging interface that is safe for consumers to use b.a means to signal the EVSE to stop charging based on the pin contact state c.signals to the EVSE that the connector is properly seated on the vehicle d.all of the above - CORRECT ANSWER- d.all of the above
Which of the following is true about the J1772 standard control pilot terminal pin's function? Select one: a.It changes the state of the EVSE according to the voltage present. b.It defines the state of the EVSE. c.It uses a +12V to -12V AC square wave signal. d.All of the above - CORRECT ANSWER- d.All of the above
Which of the following is not a variable that determines the charging time of an EV? a.Connector configuration b.Max power capacity of the EV's converter c.Size of the electrical feeder/service supplying the EVSE d.All of the above - CORRECT ANSWER- a.Connector configuration
The EV's power acceptance rate should not be considered when making EVSE purchasing decisions. Select one: True False - CORRECT ANSWER- False
Which of the following is the Japanese DC quick charging standard? Select one: a.CHAdeMO b.JARI c.SAE d.TEPCO - CORRECT ANSWER- a.CHAdeMO
The CHAdeMO V1.0 Standard has charging power up to? at? , up to?. Select one: a.62.5 kW / 500 VDC / 125 A b.350 kW / 480 VDC / 80 A c.400 kW / 1,000 VDC / 400 A d.1 MW / 2,200 VDC / 800 A - CORRECT ANSWER- a.62.5 kW / 500 VDC / 125 A
Wireless charging is more expensive than coupled EVSE.
a.covers all electrical work, from utility generation to household wiring b.is not intended to provide requirements for installation that safeguard persons and property from the hazards arising from the use of electricity c.provides minimum installation requirements Feedback - CORRECT ANSWER- c.provides minimum installation requirements
Installations covered by the NEC include which of the following? Select one: a.Industrial substations b.Installations on public and private premises c.Recreational vehicles, floating buildings, and mobile homes d.All of the above - CORRECT ANSWER- d.All of the above
NEC Chapters 1-4 apply to?. Select one: a.all installations b.all installations except as modified by Chapters 5, 6, and 7 c.only Chapter 8 d.none of the above - CORRECT ANSWER- b.all installations except as modified by Chapters 5, 6, and 7
Definitions that are specific to a particular article are located in which of the following sections?
Select one: a.xxx. b.xxx. c.xxx. d.xxx.12 - CORRECT ANSWER- b.xxx.
The maximum amount of current a conductor can carry under the conditions of use without exceeding its temperature rating is found using the calculation methods based in Article 310. Select one: True False - CORRECT ANSWER- True
Requirements for branch circuits and AFCI/GFCI protection of branch circuits are found in?. Select one: a.Article 200 b.Article 210 c.Article 230 d.Article 240 - CORRECT ANSWER- b.Article 210
The tables in Article 310 identify?. Select one:
Select one: a.EVJT / 25' b.MI / 25' c.SJO / 20' d.SO / 20' - CORRECT ANSWER- a.EVJT / 25'
EVSE shall have a(n)? system for shock protection for personnel. Select one: a.approved b.labeled c.listed d.marked - CORRECT ANSWER- c.listed
When an EV and EVSE is used to facilitate power supply as an interactive power production source, which article must be applied? Select one: a.Article 700 b.Article 702 c.Article 704 d.Article 705 - CORRECT ANSWER- d.Article 705
When an EV and its EVSE is used as a power supply for an optional standby system, requirements found in? are applied. Select one: a.Article 700 b.Article 702 c.Article 704 d.Article 705 - CORRECT ANSWER- b.Article 702
The NECA 413-2012 Standard is the only ANSI-approved standard for EVSE installation and maintenance. Select one: True False - CORRECT ANSWER- True
NECA 413-2012 contains? requirements for EVSE installation, covering everything from planning an installation to ADA considerations and commissioning process. Select one: a.basic b.complete c.performance-based d.suggested - CORRECT ANSWER- c.performance-based
b.8 AWG c.6 AWG d.4 AWG - CORRECT ANSWER- a.10 AWG
Note: T250.122 - 40 A Circuit = 10 AWG CU equipment ground
A 32,000 square foot office building has 120 20-ampere, 120-volt duplex receptacle outlets. What is the branch circuit receptacle load? Select one: a.9,600 VA b.21,600 VA c.28,000 VA d.32,000 VA - CORRECT ANSWER- d.32,000 VA
Note: 220.14(K) - use largest of either 1 VA per square foot or 180 VA per outlet.
180 VA ร 120 = 21,600 VA32,000 ft2 ร 1
VA = 32,000 VA
An existing 400-ampere, 120/208-volt, 3-phase, 4-wire service has 30 kilovolt- amperes of non-continuous load and 58 kilovolt-amperes of continuous load. How much more continuous load can be added to the service? (Note: Use 1.
for the square root of 3.)
Select one: a.33,281.92 VA b.41,436 VA c.102.5 kVA d.143.93 kVA - CORRECT ANSWER- a.33,281.92 VA
Note: 30 kVA + (58 kVA ร 1.25) = 102.5 kVA
400 A ร 208 V ร 1.732 = 144,102.4 VA
Remaining VA available prior to continuous load correction = 41,602.4 VA
41,602 VA ร 0.8 = 33,281.92 VA
A Level II EVSE with a rating of 32 amperes at 208 volts is installed. What is the minimum size copper equipment grounding conductor required to serve the installation? Select one: a.10 AWG b.8 AWG c.6 AWG