Download EVITP EXAM LATEST 2025/2026 WITH CORRECT QUESTIONS AND DETAILED ANSWERS/ALREADY GRADED A+ and more Exams Electrical and Electronics Engineering in PDF only on Docsity!
EVITP EXAM LATEST 2025 /2026 WITH CORRECT QUESTIONS
AND DETAILED ANSWERS/ALREADY GRADED A+
The EV industry is comprised of..? - CORRECT ANSWER- Auto manufacturers,
consumer advocacy groups, EV charging equipment manufacturers, research and standards organizations
The first electric vehicle can be traced back to...? - CORRECT ANSWER- 1832
Which of the following illustrates why electric vehicles were so popular in the
early days of automobiles? - CORRECT ANSWER- They were mechanically
complicated, they were quiet What factors limited the popularity of EV's as internal combustion engine vehicles
came to the market in the early 1900s? - CORRECT ANSWER- Charing times,
range, speed
A partial zero emissions vehicle (PZEV) is defined as which of the following? -
CORRECT ANSWER- A gas-engined vehicle that has zero evaporative emissions
from its fuel system The state of charge is the available capacity of the battery, expressed as a
percentage. - CORRECT ANSWER- True
Which of the following is not an alternative to fossil fuels? - CORRECT ANSWER-
Gasoline
What was the first mass- produced hybrid electric vehicle? - CORRECT ANSWER-
Toyota Prius
What improvements in technology have increased interest in EV's? - CORRECT
ANSWER- Improved range, power and lighter batteries
What best describes early EV's - CORRECT ANSWER- Quiet, easy to start and
mechanically simple
Which of the following is not a category of electric vehicles? - CORRECT
ANSWER- ICE
What category of EV has been available to consumers the longest? - CORRECT
ANSWER- HEV
Which of the following describes a plug in electric vehicle that runs on batteries until nearly depleted, then switches over to an ICE generator to extend the
battery range? - CORRECT ANSWER- PHEV
A battery electric vehicle requires external charging but does not rely on an
internal combustion generator for extended range - CORRECT ANSWER- True
L2:Which of the following acronyms represents the level of charge present in an
EV battery? - CORRECT ANSWER- SOC
L2:Electric vehicle supply equipment (EVSE) provides which of the following safety
features? - CORRECT ANSWER- GFCI protection and hardware fault detection
L2:EVSE provides DC power to the electric vehicle charging port. - CORRECT
ANSWER- False
L2:DC charging equipment provides DC directly to ...?... in an EV. - CORRECT
ANSWER- Battery management System
L2:The Society of Auto Engineers (SAE) creates standards for which of the
following? - CORRECT ANSWER- Maximum current voltage specifications for
EVSE, Plug configuration safety features L2:An AC charger with a single-phase 120 - volt connection and 14 - 16 amperes of
continuous current output is classified as a ..?... charger. - CORRECT ANSWER-
Level 1 L2:An AC charger with a single-phase 208-volt or 240-volt connection and a
continuous current output of up to 80 amperes is classified as a ?.. charger. -
CORRECT ANSWER- Level 2
L2: The purpose of the J1772 connector pins is to provide ...?... - CORRECT
ANSWER- a charging interface that is safe for consumers to use, a means to signal
the EVSE to stop charging based on the pin contact state, signals to the EVSE that the connector is properly seated on the vehicle L2:Which of the following is true about the J1772 standard control pilot terminal
pin's function? - CORRECT ANSWER- It changes to the state of the EVSE
according to the voltage present, it defines the state of the EVSE. It uses a +12V to
- 12V Ac square wave signal L2:Which of the following is not a variable that determines the charging time of
an EV? - CORRECT ANSWER- Connector configuration
L2:The EV's power acceptance rate should not be considered when making EVSE
purchasing decisions. - CORRECT ANSWER- False
L2:The State of Charge of the EV battery is ...?... - CORRECT ANSWER- a
determining factor in calculating the time necessary to fully charge an EV
L2:Which of the following is the Japanese Dx quick charging standard? -
CORRECT ANSWER- ChAdeMO
L2: The ChAdeMO V1.0 Standard has charging power up to ...?... at ..?.... , up to
...?.. - CORRECT ANSWER- 62.5kW /500 VDC/ 125 A
Chapter 9 of the NEC contains which of the following? - CORRECT ANSWER-
Tables that are applicable and enforceable when referenced elsewhere in the code Definitions that are specific to a particular article are located in which of the
following sections? - CORRECT ANSWER- xxx.
Article 110 covers ..?.. requirements for wiring and equipment. - CORRECT
ANSWER- General
L2: The SAE standard for wireless charging has specifications that include which of
the following? - CORRECT ANSWER- Magnetic triangulation for vehicle
alignment over the power source coil, means to allow for payment without physical interaction, up to 11kW charging capacity
L2: Which of the following is not true of EV charging networks? - CORRECT
ANSWER- None of the above
L2: EV networks utilize memberships that are?. - CORRECT ANSWER- fee-based
or pay-as-you-go
L2: EV networks generate revenue with which of the following? - CORRECT
ANSWER- call to pay, membership fees, station usage fees
L3: The national Electrical Code (NEC)? - CORRECT ANSWER- Provides minimum
installation requirements
L3: Installations covered by the NEC include which of the following? - CORRECT
ANSWER- industrial substations, installations on public and private premises,
recreational vehicles, floating buildings and mobile homes The maximum amount of current a conductor can carry under the conditions of use without exceeding its temperature rating is found using the calculation
methods based in article 310. - CORRECT ANSWER- true
The EV industry is comprised of?. Select one: a.auto manufacturers b.consumer advocacy groups c.EV charging equipment manufacturers d.research and standards organizations
e.all of the above - CORRECT ANSWER- e. all of the above
A partial zero emissions vehicle (PZEV) is defined as which of the following? Select one: a.A gas-engine vehicle that has zero evaporative emissions from its fuel system b.A plug-in electric vehicle c.A vehicle with a hybrid gas-electric drive train
d.2002 - CORRECT ANSWER- a. 1832
Which of the following illustrates why electric vehicles were so popular in the early days of automobiles? Select one: a. They were clean to operate. b. They were mechanically complicated. c. They were quiet.
d. Both a. and c. - CORRECT ANSWER- d.Both a. and c.
What factors limited the popularity of EVs as internal combustion engine vehicles came to the market in the early 1900s? Select one: a.Charge times b.Range c.Speed
d.All of the above - CORRECT ANSWER- d.All of the above
What was the first mass-produced hybrid electric vehicle? Select one: a. GM EV- 1 b. Honda Insight Hybrid
c. Tesla Model 3
d. Toyota Prius - CORRECT ANSWER- d.Toyota Prius
What improvements in technology have increased interest in EVs? Select one: a. Charging stations specific to each type of vehicle b. High cost and poor public awareness c. Improved range, power, and lighter batteries
d. None of the above - CORRECT ANSWER- c.Improved range, power, and lighter
batteries What best describes early EVs? Select one: a. Loud and difficult to steer b.Oily, noisy, and hard to start c.Quiet, easy to start, and mechanically simple
d.Very unreliable - CORRECT ANSWER- c.
Quiet, easy to start, and mechanically simple Which of the following is not a category of electric vehicles? Select one: a. BEV
a. An energy recovery system b. Not reliable as a braking method c. Obsolete technology that existed on EV models in the 1990s
d. Turns electrical energy to kinetic energy - CORRECT ANSWER- a.An energy
recovery system Which of the following describes an EV drivetrain architecture in which power can be transmitted to the drive from two sources at the same time? Select one: a. Full electric drive b. Parallel hybrid drive c. Series hybrid drive
d.3-phase series drive - CORRECT ANSWER- b.Parallel hybrid drive
What types of commercial/industrial vehicles are currently available in an electrified version? Select one: a. Cargo and material-handling equipment b. Delivery vans and buses c.Semi-trailer trucks
d.All of the above - CORRECT ANSWER- d.All of the above
Charging methods for battery electric buses include which of the following?
Select one: a. Above/below bus charging wireless charging b. Plug-in charging c. Wireless power transfer
d. All of the above - CORRECT ANSWER- d.All of the above
Fleet vehicle battery capacity has reached upward of? for heavy duty vehicles. Select one: a.500 Wh b.10 kWh c.550 kWh
d.none of the above - CORRECT ANSWER- c.550 kWh
Charging is defined as which of the following? Select one: a. Refilling brake fluid in an EV b. Removing the batteries from an EV and placing them inside charging equipment c.Replacing batteries in an EV
d.Supplying power (kW) to an EV battery - CORRECT ANSWER- d.Supplying
power (kW) to an EV battery
Electric vehicle supply equipment (EVSE) provides which of the following safety features? Select one: a.A continuously energized output b. GFCI protection c. Hardware fault detection
d. Both b. and c. - CORRECT ANSWER- d.Both b. and c.
EVSE provides DC power to the electric vehicle charging port. Select one: True
False - CORRECT ANSWER- False
DC charging equipment provides DC directly to? in an EV. Select one: a.battery management systems b.battery monitoring devices c.charge multiplier systems
d.current management systems - CORRECT ANSWER- a.battery management
systems An AC charger with a single-phase 120 - volt connection and 14 - 16 amperes of continuous current output is classified as a? charger.
Select one: a. Level 1 b. Level 2 c.low-voltage
d.SAE standard - CORRECT ANSWER- a.Level 1
The purpose of the J1772 connector pins is to provide?. Select one: a.a charging interface that is safe for consumers to use b.a means to signal the EVSE to stop charging based on the pin contact state c.signals to the EVSE that the connector is properly seated on the vehicle
d.all of the above - CORRECT ANSWER- d.all of the above
Which of the following is true about the J1772 standard control pilot terminal pin's function? Select one: a. It changes the state of the EVSE according to the voltage present. b. It defines the state of the EVSE. c. It uses a +12V to - 12V AC square wave signal.
d. All of the above - CORRECT ANSWER- d.All of the above
a.62.5 kW / 500 VDC / 125 A b.350 kW / 480 VDC / 80 A c.400 kW / 1,000 VDC / 400 A
d.1 MW / 2,200 VDC / 800 A - CORRECT ANSWER- a.62.5 kW / 500 VDC / 125 A
Wireless charging is more expensive than coupled EVSE. Select one: True
False - CORRECT ANSWER- True
Which of the following is not true of EV charging networks? Select one: a. Charging networks offer both paid memberships and free memberships with pay-as-you-go charging. b. There are over a dozen networks across the U.S. and Canada. c. They allow businesses a way to draw consumers to charging equipment and generate revenue via transaction processing.
d. None of the above - CORRECT ANSWER- d.None of the above
EV networks generate revenue with which of the following? Select one: a. Call-to-pay
b. Membership fees c. Station usage fees
d. All of the above - CORRECT ANSWER- d.All of the above
The National Electrical Code (NEC)?. Select one: a.covers all electrical work, from utility generation to household wiring b. is not intended to provide requirements for installation that safeguard persons and property from the hazards arising from the use of electricity c. provides minimum installation requirements
Feedback - CORRECT ANSWER- c.provides minimum installation requirements
Installations covered by the NEC include which of the following? Select one: a. Industrial substations b. Installations on public and private premises c. Recreational vehicles, floating buildings, and mobile homes
d.All of the above - CORRECT ANSWER- d.All of the above
NEC Chapters 1 - 4 apply to?. Select one: a.all installations
