Download Florida State Firefighter Exam: Practice Questions and Answers with Rationales and more Exams Safety and Fire Engineering in PDF only on Docsity!
FL STATE FIREFIGHTER TEST ACTUAL EXAM||2025-
2026|| 110 QUESTIONS AND CORRECT VERIFIED
ANSWERS WITH RATIONALES||GRADED A+
What is the mission of the fire service? A. To provide a variety of services B. To determine how fire loss occurs C. To save lives and protect property D. To regulate training of emergency responders - ANSWER ANS: C What NFPA ® standard establishes basic training criteria for Firefighter I and Firefighter II? A. 1001 B. 1002 C. 1021 D. 1582 - ANSWER ANS: A A(an) is a collection of rules enacted by law in a particular jurisdiction. A. code B. policy C. standard D. procedure - ANSWER ANS: A Which of the following BEST describes the action first taken after an alert to the station? A. Recording of incident information B. Processing of postincident paperwork C. Dispatching of emergency services responders D. Training of emergency responders for annual certification - ANSWER ANS: C
The use of ten-codes in radio transmissions was replaced when agencies began to adopt which of the following? A. Incident Action Plan (IAP) B. Incident Command System (ICS) C. National Fire Protection Association (NFPA®) D. National Incident Management System (NIMS) - ANSWER ANS: D What task may a telecommunications center be assigned during a progress report? A. Requesting multiple or special alarms B. Providing periodic time transmissions C. Warning personnel of impending hazard on scene D. Giving command in the absence of command staff - ANSWER ANS: B Which of the following must be considered when deciding the size of a collapse zone? A. Local adopted building codes B. Number of personnel on-scene C. Type of building construction and safest location for personnel D. Number of personnel on-scene and type of building construction - ANSWER ANS: C What type of reaction absorbs energy as it occurs? A. Kinetic B. Potential C. Exothermic D. Endothermic - ANSWER ANS: D Which of the following BEST describes when SARs are used?
C. While performing short-term work in emergency operations D. During inspection if cylinder contains less than 90% of capacity - ANSWER ANS: Which of the following types of rope is the only rope required to have a rope log? A. Utility rope B. Escape rope C. Life safety rope D. Water rescue rope - ANSWER ANS: C Which part of the rope is used to tie a knot or hitch? A. Knot B. Working C. Running D. Standing - ANSWER ANS: B Which type of knot can be used to secure a victim's hands or feet to drag the victim to safety? A. Bowline B. Handcuff C. Figure-eight D. Becket bend - ANSWER ANS: B Once a search is complete, a firefighter should: A. report promptly to RIC/RIT. B. report promptly to recovery. C. report promptly to the supervisor.
D. report promptly to decontamination. - ANSWER ANS: C What are the two objectives for a structural search? A. Search for life; assess fire conditions B. Search for victims; assess structural integrity C. Search for witnesses; assess fire crew needs D. Search for occupants; assess building conditions - ANSWER ANS: A In the acronym LUNAR, the A stands for: A. awareness. B. assignment. C. adjustment. D. arrangement. - ANSWER ANS: B Which of the following BEST describes the result of running a generator for a long period of time without a load? A. May contaminate fuel B. Can damage electrical system C. Will overheat and damage generator D. Allows equipment to warm-up before use - ANSWER ANS: C Which rescue tool power source is typically powered by pumps? A. Electric B. Hydraulic C. Pneumatic D. Electric/pneumatic - ANSWER ANS: B
B. Buttress tension system C. Adjustable struts system D. Pneumatic lifting bag system - ANSWER ANS: B What initial action is the next priority after stabilizing the scene? A. Stabilize the victim B. Size-up the situation C. Establish scene security D. Communicate information - ANSWER ANS: A What type of structural collapse occurs when the floor and/or roof assemblies on both sides of a load-bearing wall collapse, allowing a good chance of victim survival? A. A-frame B. Pancake C. V-shaped D. Cantilever - ANSWER ANS: A In the OATH method of signaling on a search line, two tugs represents: A. O - ok B. H - help C. A - advance D. T - take-up slack - ANSWER ANS: C Which of the following is an example of a push/pull tool? A. Hux bar B. Pike pole
C. Drywall saw D. Battering ram - ANSWER ANS: B Cutting edges on axes should be inspected for: A. wetness or swelling. B. rust, tarnish, or dirt. C. chips, cracks, or spurs. D. cracks, blisters, or splinters. - ANSWER ANS: C When caring for an unprotected metal surface, use a metal file to: A. hide defects. B. remove dirt and rust. C. make blade edge sharp. D. remove burrs from cutting edge. - ANSWER ANS: D NFPA ® 1931 requires that single, roof combination and extension ladders must support a maximum load of: A. 200 lbs. (91 kg) B. 300 lbs. (136 kg) C. 600 lbs. (272 kg) D. 750 lbs. (340 kg) - ANSWER ANS: D Ground ladders should be service tested before being placed in service, while in service, and after use that exposes the ladder to high heat or rough treatment. A. after cleaning
- What type of hose is designed for drafting water from static water supplies or connecting to a fire hydrant? A. Soft sleeve hose B. Hard-suction hose C. Double-jacket hose D. Suction supply hose - ANSWER ANS: B What type of fire hose damage can weaken the jacket which can lead to ruptures under pressure? A. Organic damage B. Thermal damage C. Chemical damage D. Mechanical damage - ANSWER ANS: A Which of the following equipment is necessary for service testing? A. Hose clamps B. Chaffing blocks C. A hose-washing machine D. Nozzles with shutoff valves - ANSWER ANS: D The test site for service testing should be: A. on a gravel area. B. on a slight grade. C. as close to the station as possible. D. large enough to lay out hose with multiple kinks. - ANSWER ANS: B
Which of the following procedures should be followed when service testing fire hose? A. Close all valves as quickly as possible B. Pick up all large-diameter hose before charging it C. Stand away from the discharge valve connection when charging hose D. Connect the hose to discharges on the pump panel side of the apparatus - ANSWER ANS: C Which action of fire fighting foam creates a barrier between the fuel and the fire? A. Cooling B. Aerating C. Separating D. Penetrating - ANSWER ANS: C Foam lowers surface tension of water, allowing it to fires in Class A materials. A. cool B. smother C. suppress D. penetrate - ANSWER ANS: D Class A foam extinguishes and/or prevents ignition by: A. allowing water to penetrate fuels. B. creating a barrier between the fuel and the fire. C. preventing air from reaching the fuel or mixing with vapors. D. lowering the temperature of the fuel and adjacent surfaces. - ANSWER ANS: A When applied to solid fuels, Class A foam blankets the fuel, controls flames, then: A. changes the pH of the water.
A. polar solvents. B. viscous liquids. C. fluorosurfactants. D. hydrocarbon fuels. - ANSWER ANS: A Which foams are required to extinguish fires of ethanol or ethanol-based fuels? A. Class A foams
B. Synthetic foams C. Protein-based foams D. Alcohol-resistant foams - ANSWER ANS: D Which of the following statements about foam proportioning is MOST accurate? A. Most Class A foams are mixed in proportions of 3 to 6 percent. B. Most Class B foams are mixed in proportions of 1 percent or less. C. Mixing Class A foam at a higher recommended percentage results in a thick, dry D. The percentage rate for proportioning foam is determined by the authority having foam. jurisdiction. - ANSWER ANS: C Which of the following proportioning methods depends on the Venturi Principle to draw foam through a hose connected to the foam concentrate container and into the water stream? A. Injection B. Eduction C. Premixing D. Batch-mixing - ANSWER ANS: B 53.Which of the following statements about foam proportioners and delivery systems is MOST accurate? A. The foam proportioner adds air into the foam solution to produce finished foam. B. The foam proportioner and delivery system must be compatible to produce usable C. Either a foam proportioner or a foam generating system is needed to produce a D. The foam-generating system introduces the appropriate amount of foam
D. Surface fire - ANSWER ANS: C Which kind of ground cover fire burns on the soil surface, consuming low-lying grass, shrubs, and other vegetation? A. Crown fire B. Ladder fire C. Ground fire D. Surface fire - ANSWER ANS: D Which of the following is a long narrow strip of fire extending from the main fire? A. Head B. Flank C. Island D. Finger - ANSWER ANS: D What rule can be amended if a life safety hazard to a victim that can be saved without undue risk to firefighters is present on scene? A. SAR rule B. SCBA rule C. Two-in, two-out rule D. Situational awareness rule - ANSWER ANS: C What fireground role is defined as the one that works to locate and assist firefighters trapped during operations? A. Incident Commander
B. Second-arriving company C. Rapid intervention crew/team D. Fireground support company - ANSWER ANS: C What fireground role should be two or more members wearing complete PPE and respiratory protection, with the purpose of locating firefighters incapacitated during operations? A. Incident Commander B. Second-arriving company C. Rapid intervention crew/team D. Fireground support company - ANSWER ANS: C Which of the following BEST describes the flash point of flammable liquids? A. Less than 100°F (38°C) B. Greater than 100°F (38°C) C. Each varies, but it is never less than 50°F (10°C) D. Each varies, but it is always higher than 50°F (10°C) - ANSWER ANS: A Where should apparatus be located at a Class B fire? A. Upwind and uphill of the incident B. Upwind and downhill of the incident C. Downwind and uphill of the incident D. Downwind and downhill from the incident - ANSWER ANS: A Water as a mechanical tool can move to where they can burn safely. A. Class A fuels B. Class B fuels C. Class C fuels
B. Request mutual aid extrication teams C. Use hose streams to protect exposures if needed D. Monitor, but do not shut off pressurized gas supply - ANSWER ANS: C Control of all evidence must be maintained as part of the required in legal cases. A. area of origin B. chain of custody C. fire investigation D. collection of evidence - ANSWER ANS: B Which of the following may appear on floors and indicate where fuel burned in that location? A. Debris B. Charring C. Flashover D. Fire pattern - ANSWER ANS: B Which of the following decides what evidence is collected? A. Fire chief B. Firefighter C. Fire investigator D. Insurance investigator - ANSWER ANS: C Who has legal responsibility for determining origin and cause of a fire? A. Fire chief B. Firefighter C. Police officer D. Fire investigator - ANSWER ANS: A
Responsibility for can lie with state fire marshal, state police, or other state agency. A. fire cause B. investigation C. amount of loss D. insurance information - ANSWER ANS: A Once the control of scene has been relinquished, personnel can only re-enter after: A. providing valid identification. B. securing permission from owner. C. speaking with the insurance investigator. D. logging in with the person granting access. - ANSWER ANS: B Which alarm system component serves as the "brain" for the fire alarm system? A. Initiating device B. Primary power supply C. Notification appliance D. Fire alarm control panel - ANSWER ANS: D The fire alarm control panel: A. is required to be red with white lettering. B. contains electronics that control and monitor the fire alarm system. C. senses the products of combustion or other hazardous conditions. D. notifies occupants of an emergency condition through visual text or symbols. - ANSWER ANS: B The fire command center: A. senses products of combustion.
