Download IICRC Fire/Odor Part 2 Exam: Questions and Answers and more Exams Water and Wastewater Engineering in PDF only on Docsity!
IICRC FIRE/ODOR PART 2 EXAM |
QUESTIONS & 100 % CORRECT ANSWERS
(VERIFIED) | LATEST UPDATE | GRADE A+
If you do not have the correct PPE on, you must _______________________ spaces that are being wet fogged, thermally fogged or being treated with O-Zone. Correct Answer: vacate Food in boxes or cans subject to heat are _______________________ _______________________ by the restorer before disposal. Correct Answer: properly documented All contents removed during the emergency service pack out will be preconditioned with a _______________________ _______________________ _______________________ or _______________________ _______________________ _______________________. Correct Answer: lambs wool duster; vacuuming w/brush attachment The cleaning procedure called _______________________ uses dry soil removal to clean smoke residues from delicate fabrics and services. Correct Answer: preconditioning
When mixing chemicals, technicians should fill the mixing container first _______________________ _______________________, then add the _______________________ _______________________. Correct Answer: with water; chemical concentrate _______________________ _______________________ cream is affective for cleaning finished wood furniture with heavy smoke damage. Correct Answer: Wood restoring What direction do you clean finished wood? Correct Answer: Always work with the direction of the grain of the wood. Usually, the most economical restoration option is _______________________. Correct Answer: cleaning The cleaning technicians primary task when cleaning structural items is to a store and preserve either _______________________ or material _______________________. Correct Answer: fabrics; surfaces A basic step required in like to moderate smoke odor situations is to begin by cleaning the _______________________ area. Correct Answer: source
Correct Answer: degreaser Washable hard surfaces such as glossy paints, plastic surfaces, and porcelain are commonly cleaned with _______________________ _______________________ cleaners. Correct Answer: general purpose Normally, when cleaning light to moderate soot contaminated flat latex painted surfaces, restorers should _______________________, or dry sponge, followed by wet cleaning when necessary. Correct Answer: pre-condition When stains or odors persist after painted surfaces are clean, the surface should be _______________________ before we painting. Correct Answer: sealed A major complication associated with smoke damaged attics is accessibility to surfaces, irregular surfaces and contents of _______________________ value. Correct Answer: questionable When a wood structural member is charred, depending upon the severity, it should be scraped before sealing, removed and replaced or cleaned using _______________________ media.
Correct Answer: blast Technicians should not decided they will be able to restore a damaged item until they have pretested the item and communicated with the _______________________. Correct Answer: customer When cleaning finished wood surfaces, it is recommended to wash the wood panel surfaces in the same direction of the _______________________ the grain. Correct Answer: wood When cleaning finished paneling with light to moderate smoke residues, wet clean with a _______________________ _______________________ _______________________. Correct Answer: mild alkaline detergent _______________________ _______________________ gel or cream is a restoration agent used to remove smoke in bedded within a clear coated finished surface, especially on wooden furniture. Correct Answer: wood restoring Before evaluating the success of wet cleaning procedures on masonry surfaces, the surfaces should be _______________________. Correct Answer: dry
Correct Answer: end The bathroom fixture surface that is most vulnerable to smoke residue is _______________________. Correct Answer: fiberglass Usually, fiberglass fixtures are cleaned effectively with _______________________ _______________________ cleaning compounds. Correct Answer: liquid soft-scrub Ceramic tile grout responds to cleaning with either _______________________ or _______________________ cleaning agents. Correct Answer: alkaline; acid Acid base cleaning agents are aggressive cleaners which can be applied to tile, grouting and _______________________ _______________________ _______________________. Correct Answer: aluminum window frames While working with and smaller enclosed room areas with aggressive cleaning agents, restores should adequately _______________________ and wear _______________________. Correct Answer: ventilate; PPE
The first step in cleaning non asbestos acoustical ceiling tiles with light soot begins by preconditioning with a _______________________. Correct Answer: vacuum When planning to clean and deodorize smoke damage light fixtures, a safety step before proceeding with cleaning is to _______________________ _______________________ electrical power. Correct Answer: turn off Areas that need to be cleaned when processing a _______________________ _______________________ system include: interior and exterior of exhaust vents and replacing or cleaning filters. Correct Answer: kitchen ventilation Technicians who clean kitchen ventilation systems often overlook the vent hood filters, _______________________, and _______________________ _______________________ _______________________. Correct Answer: fans; exhaust duct systems A _______________________ _______________________ is a malfunction of an oil fired heating system with attached ducting. Correct Answer: puff back
Correct Answer: Precondition, dryclean, wet clean/deodorize, seal as required, and paint. Cleaning steps for semi gloss painted structural surfaces: Correct Answer: Precondition, wet clean/deodorize, seal as required, and paint. Cleaning steps for high speed wall cleaning: Correct Answer: Precondition, apply degreaser with a pump up sprayer, scrub wall with soft brush, squeegee suspended soil, and towel dry.
