Information Security lab work, Assignments of Information Security and Markup Languages

Download Information Security lab work and more Assignments Information Security and Markup Languages in PDF only on Docsity!

Information Security Management

CSE

Name: Utkarsh Goyal

Reg.No: 19BIT

SLOT: L51+L

Aim: To create a topology using 4 PC’s and a Switch using the IP address mentioned in the question to observe the flow of data from host to host of your choice by creating network traffic. Procedure: ● Select PC from the End Devices option in the bottom left-hand corner. Drag and drop 4 PCs onto the design page. ● Select Switch from the Switch options in the bottom left-hand corner. Add a 2960 switch to your prototype network by dragging it onto your design page. ● Select Connections from the bottom left-hand corner. Choose ‘automatically choose connection type’. Click the first host (PC0) and assign the cable to the FastEthernet0 connector. Click the switch (Switch0) and select a connection FastEthernet0/1 for PC0. ● Repeat step c for PC1, PC2 and PC3. Select FastEthernet0/2 on the Switch0 for PC1, FastEthernet0/3 for PC2 and FastEthernet0/4 for PC3. ● Switch to Simulation Mode in the bottom right-hand corner. ● Click on Add Simple PDU by clicking the closed envelope in the upper toolbar. With the envelope icon, click PC0 to establish the source. Click PC2 to establish the destination. ● Select Play in the Simulation Panel. Observe the path ICMP and ARP envelope.

Aim: Configure the topology diagram and verify the connection between PC0 and PC1. Repeat the procedure for Router2, PC2 and PC3. Procedure: ● Select PC from the End Devices option in the bottom left-hand corner. Drag and drop 2 PCs onto the design page. ● For the first part of the question, select switch from the Switch options in the bottom left-hand corner. Add a 2960 switch to your prototype network by dragging it onto your design page. And Ping the 2 PC’s to verify the connection on the command prompt. ● For the second part of the question, add a router instead of switch from the bottom left and also add 2 PC’s to configure its IP address on the new design page.

Output: 2nd part of Question 2:

Router Configuration: