Download Lab Work on Thermodynamics of the Solubility of Borax and more Lab Reports Chemistry in PDF only on Docsity!
Thermodynamics of the Solubility of Borax
Purpose:
To determine the thermodynamic quantities H and S for the solvation reaction of borax in water, by measuring the solubility product constant over the temperature range from 55 to15 C.
Na 2 B 4 O 7 10H 2 O( s ) 2Na +( aq ) + B 4 O 5 (OH) 42 ( aq ) + 8H 2 O( l )
Introduction:
As you have seen or will see in Thermochemistry (Chapter 18) the free energy change in a reaction, G, is related to the equilibrium constant for the reaction by the equation G = RTln(K) (Chang Eqn. 18.14)
Looking at this equation we see that if the reaction is thermodynamically favored, G < 0, and we would expect K to be large, K 1. If K is much greater than one, we will
observe the reaction proceeding primarily to products.
The free energy expresses the net effect of two thermodynamic quantities: the enthalpy, H, and the entropy, S. Under constant temperature conditions, this is expressed by the equation G = H T S (Chang Eqn. 18.10)
The two physical contributions to the free energy are the heat absorbed or released during a reaction, H, and the molecular disorder created during a reaction, S.
Because the above two equations are expressions of G , the right hand side of each equation must be equivalent.
RTln(K) = H T S
Rearranging this expression yields
R
S
T
R
- H
ln(K).
As long as we can determine the equilibrium constant at several temperatures, this equation is well-suited for determining H and S by linear regression.
y m x b
R
S
T
R
- H
ln(K)
The above expression is valid only if H and S are not temperature dependent quantities. Over the small temperature range that we shall investigate, this assumption is valid for borax.
The method of determining the equilibrium constant in this experiment is worth discussing. The equilibrium for the reaction to be studied is actually a solubility product constant, K (^) sp. For the chemical reaction given above the equilibrium constant is given by
Ksp = [Na +]^2 [B 4 O 5 (OH) 42 ]
Fortunately, the stoichiometry of the reaction relates the concentrations of Na +^ and B 4 O 5 (OH) 42 [Na +^ ] = 2[B 4 O 5 (OH) 42 ]
Making this substitution into the K (^) sp expression yields
Ksp = 4[B 4 O 5 (OH) 42 ]^3
The amount of B 4 O 5 (OH) 42 in solution is determined by titration with HCl using methyl red as an indicator. The balanced equation for the titration is
B 4 O 5 (OH) 42 + 2H
Experimental Procedure:
Obtain 5 clean 250 mL beakers and label them 1-5. Using a 100 mL beaker and a thermometer for a stirring rod, prepare a saturated solution of borax by adding about 25 g of borax to approximately 80 mL of water. Adjust a hot plate to a heat setting of 5, and place the 100 mL beaker on the hot plate. Monitor the temperature of the solution by stirring it with your thermometer and checking the reading frequently. It is important to stir the solution frequently and take temperature readings while the bulb of the thermometer is not resting on the bottom of the beaker. When the temperature of the solution is 57-58 C (heating over 60 C will decompose Borax), remove the beaker from the hot plate.
With the beaker sitting on the countertop, stir the solution with your thermometer until the temperature is around 55 C. Let the beaker stand with the thermometer in it until the solid has settled out of the solution. While the solution is settling, rinse your 10 mL graduated cylinder in hot water from a tap to warm the cylinder. If you pour the hot borax solution into a cold graduated cylinder, the borax will precipitate in the cold cylinder. When the solid has settled out, read and record the temperature to the nearest 0.1 C, then immediately decant exactly 5.0 mL of the solution into the warmed 10 mL graduated cylinder. Now transfer the contents of the 10 mL graduated cylinder into beaker #1. Rinse the cylinder several times with water and pour these rinses into the beaker as well.
Now allow the solution to cool to a temperature near 45 C. (Make sure you are stirring the solution frequently.) When the solution temperature is around 45 C, let the solution stand until the solid settles out and follow the above sample collection process for transferring 5.0 mL of the solution from the original beaker to beaker #2. Again
Determining G, H, S for Borax Solubility
From the Ksp vs. temperature data you collected you will determine the state functions H, S and Ksp at 25 C for the dissolving of Borax. The slope and intercept of the linear relationship between lnK and 1/T yields H and S. We will use Excel to plot your experimental data and perform a linear-regression to determine the slope and intercept. Below are the columns in Excel that you need to create.
Begin entering your temperature and Ksp data in the first two columns. The last three columns are formulas that calculate 1/T and ln(K). Enter the formulas above in the first row. Clicking in the first formula box and dragging the formula down with the cross on the bottom right corner of the box will fill the remaining rows in a column with the formula.
The plot of lnK vs 1/T is made by highlighting the two columns and clicking on the chart
wizard button.
In the chart wizard select the XY scatter plot and data points. Then click Finish.
The data points in the plot can be fit to a straight line by right clicking on a data point and selecting Add Trendline from the menu box. In the fit menu you must select Add Equation to Chart from the Options tab.
Record the equation to the line in your lab notebook. Use the slope and intercept to calculate H and S. Plug in 298 K into your equation to determine Ksp at 25 C.
Turn in your blue lab sheets and finish your abstract.
Have a great weekend.
