NEIEP 800 Final Exam | 100% Correct
Answers | Verified | Latest 2024 Version
Hydro elevators in low rise applications do not need an _____ _____ room. - ✔✔overhead machine
Some advantages of hydros are lower equipment and building construction costs because the load of a
hydro is carried to the _____ where as the load of a traction car is carried by the _____ _____. -
✔✔ground, building structure
When drilling the jack hole, the only proper way to determine if the hole is plumb is to remove the drill
stem and bit and use a _____ _____. - ✔✔Spider Bob
To plumb the hole, a spider bob is attached to a length of piano wire suspended from as near as possible
to the top of the _____ or from a fixed point on the drill rig. - ✔✔Hoistway
When welding a joint, lay _____ inch tack welds _____ degrees apart, shift it 90 degrees and lay two
more 1 inch tack welds 180 degrees apart. - ✔✔1, 180
On power units having the motor beneath the tank, the pump may be either _____ driven or _____
coupled. - ✔✔belt, direct
The purpose of the _____/_____ is to silence the effect of any pulsations in the pump output and should
be as close to the pump as possible. - ✔✔silencer, muffler
On Bolsters/Bolster Assembly, the plunger is fastened to the _____ _____ which is then mounted to the
center of the Bolster Assembly. - ✔✔platen plate
With wye-delta, reduced current starting is accomplished without the need for _____. - ✔✔resistors
_____ run buttons should run the platform and sling at leveling speeds only. - ✔✔Temporary
