Partial preview of the text
Download OSHA 10 Final Exam 2025-2026. 100 Questions WITH correct and Verified Answers. GRADED A. and more Exams Workplace Safety in PDF only on Docsity!
QUESTION :The creation of OSHA provided this important right to workers: - CORRECT :The right to a safe and healthful workplace. QUESTION :What type of OSHA inspection is conducted when immediate death or serious harm is likely? - CORRECT :Imminent danger. QUESTION :OSHA requires that employers pay for most required personal protective equipment (PPE), including: - CORRECT :Hard hats. QUESTION :During an OSHA inspection: - CORRECT :You have the right to talk to the inspector privately. QUESTION :When an employer receives an OSHA citation, it must be: - CORREC :Posted for 3 days or until the violation is fixed. QUESTION :The right of workers to seek safety and health on the job without fear of punishment is spelled out in: - CORRECT :Section 11(c) of the OSH Act. QUESTION :Among the rights related to OSHA recordkeeping, workers have the right to review: - CORRECT :The OSHA 300 Log and the OSHA 300 Summary. QUESTION :OSHA's mission is to: - CORRECT :Protect the safety and health of America's workers. QUESTION :One of the main responsibilities employers have under OSHA is to: CORRECT :Provide training required by OSHA standards. also known as: - CORRECT :Part 1926 and Part 1910. QUESTION :Guardrails are often used by employers to protect workers from falls. How high must the top guardrail (the toprail) be above the working surface? - CORRECT :42 inches, plus or minus 3 inches QUESTION :More are killed from falls than in any other construction occupation. - CORRECT :lronworkers QUESTION :Competent persons are not necessary when scaffolds are being moved. - CORRECT :False QUESTION :Not every walking or working surface can be a potential fall hazard. CORRECT :False QUESTION :Wet or damp conditions worsen electrocution hazards. - CORRECT โTrue QUESTION :Which of the following are preventative measures that can be taken to protect yourself from electrocution hazards? - CORRECT :A and C only ([a] Keep a safe distance from overhead power lines, [c] Use nonconductive equipment) QUESTION :Which of the following are ways employers must protect their employees on the job site? - CORRECT :All of the above ([a] Ensure overhead power line safety, [b] By supplying GFCls, or ground-fault circuit interrupters, [c] Establish and enact an assured equipment grounding conductor program [AEGCP]) ([a] Workers should have been aware of overhead power lines, [b] employees should have received proper safety training) QUESTION :If your hard hat sustains a heavy blow from a falling or flying object you . - CORRECT :must replace it immediately QUESTION :To safely control the traffic flow and protect workers near public roadways and moving construction equipment use you could use? - CORRECT :All of the above ([a] Traffic signs, [b] barricades, [c] flaggers) QUESTION :All rigging equipment must be inspected each lift. - CORRECT :prior to QUESTION :A struck-by hazard can be described as anytime a worker - CORRECT :is hit by a falling, swinging, flying or rolling object. QUESTION :As a load is mechanically lifted, the materials. - CORRECT :may strike workers if the load swings, twists or turns. QUESTION :Struck-by injuries are produced by forcible contact or impact between the injured person and a/n_. - CORRECT :object or piece of equipment QUESTION :The following are examples of struck-by hazards. Which one is an example of a struck-by flying hazard? - CORRECT :Hit by a nail from a nail gun QUESTION :Employers must protect workers from struck-by hazards by . - CORRECT :providing PPE such as hard hats and safety glasses QUESTION :Struck-by ______object hazards exist when something is being propelled, hurled or thrown. - CORRECT :flying QUESTION :Among the list of ways workers can protect themselves when working on or near any construction zone, is to โ___ . - CORRECT :Wear high-visibility reflective clothing QUESTION :Make sure all loads carried by equipment are stable and_. - CORRECT :secured QUESTION :Caught in or-between hazards are related with excavations [trenches]; therefore, the hazard considered to be the greatest risk is: - CORRECT :Cave-ins QUESTION :To protect against caught-in or -between hazards, a worker should not only avoid wearing loose clothing or jewelry, but also a worker should avoid: - CORRECT :Working with equipment/machinery that has not been locked-out QUESTION :To prevent being pinned between equipment or other objects, QUESTION :All hand-held power tools should have guards and_on them. - CORRECT :safety switches QUESTION :Which procedure helps to ensure equipment doesn't accidentally reenergize when it's being repaired or worked on? - CORRECT :Lockout/Tagout QUESTION :One who is capable of identifying existing and predictable hazards in the surroundings and who has authorization to take prompt corrective measures to eliminate them is a(n)_. - CORRECT :competent person QUESTION :Workers should not work in an unprotected trench that is 5 feet deep or more. The type of protection installed may be sloping or benching, trench box or shield and_. - CORRECT :shoring. QUESTION :Workers should wear a__if required, to avoid being thrown from a vehicle and crushed as the vehicle tips over. - CORRECT :seatbelt QUESTION :Providing worker training on the safe use of the equipment being operated is the responsibility of the: - CORRECT :Employer QUESTION :All respiratory protection equipment must be approved by: CORRECT :NIOSH QUESTION :The first step in developing a comprehensive safety and health program including personal protective equipment is to: - CORRECT :Perform a hazard assessment 
