Download OSHA 510 Exam: Complete Questions & Answers for Safety and more Exams Public Health in PDF only on Docsity!
OSHA 510 EXAM NEWEST EXAM 2025 |
COMPLETE QUESTIONS AND CORRECT
ANSWERS | GRADED A+ | LATEST EXAM |
VERIFIED ANSWERS
OSHA stands for Occupational Safety and Health Administration OSHA's focus four injuries are:
- fall
- caught-in
- struck by
- electrical OSHA's mission is to _____ and __ . save lives and prevent injuries OSHA's primary method of enforcement of safety regulations is through __ . worksite inspections OSHA was formed because_ were increasing. injuries and illnesses OSHA was signed into law by President __ in December of ___ _. Nixon; 1970 In the correct order, what is OSHA's inspection priority?
- imminent danger
- fatality or hospitalization
- worker complaints/referrals
- targeted inspections
- follow-up inspection
The four types of OSHA citations and dollar amounts of fines are:
- Willful up to $134,
- Serious up to $13,
- Other-than-serious up to $13,
- Repeated up to $134, PPE stands for Person Protective Equipment The effects of workplace injuries and illnesses include a. lower morale b. increased costs to retain workers c. slower production rates d. higher turnover e. increased worker's compensation rates OSHA standards are found in the title 29 labor CFR Part ___ contains record keeping standards
Part ___ contains general industry standards.
Part ___ contains construction industry standards.
A ___ standard applies to all industries. horizontal A ___ standard applies only to certain industries. vertical Direct costs are _____ quantified. easily Direct costs are usually paid by submitting claims to ____ companies. insurance
Spoil piles, material and equipment must be kept 2 feet from the excavation Excavation inspections must be conducted DAILY and before start of work Excavation inspections must be conducted to determine soil classification For all trenches deeper than 5 feet, OSHA requires what to protect workers from cave-in? a. sloping b. shoring c. benching d. shielding Stable rock natural solid mineral material than can be excavated with vertical sides Type A: cohesive soils with an unconfined compressive strength of __ tons per square foot 1.5 tons Type B: cohesive soils with an unconfined compressive strength greater than __ tsf but less than __ tsf
Type C: cohesive soils with an unconfined compressive strength of __ tsf or less 0.5 tsf Type A can be sloped at a ratio of __ if the excavation will be open for less than 24 hours and is less than 12 feet in depth
Any excavation more than __ feet in depth requires a qualified person to design the protection 20 feet The classification of soil shall be made based on the results of at least one visual and one __ analysis conducted by a competent person manual The best method to prevent injuries is to ____. prevent the hazard The second best way to prevent injuries is to ____. eliminate the hazard The third best way to prevent an injury is to ___ _. control exposure The preferred method to control exposure is __ _. engineering The second best way to control exposure is __ _. administrative The least preferred way to control exposure is __ _.
PPE
Incident Rates allow for a comparative level of injuries and illnesses among different _____, _ , and___ _. industries, organizations, or operations The formula for incident rates is
incidents x 200,000 / employee hours worked
TRIR Total Recordable Incident Rate DART Days Away Restricted Transferred
the four types of and definitions of employers in a multi-employer situation are
- creating employer
- exposing employer
- correcting
- controlling Creating Employer employer that created or caused the hazard Exposing employer employer whose own employees were exposed Correcting employer employer responsible for correcting hazard Controlling employer general supervisory authority with the power to require correction
For an employer to provide a defense against a citation in a multi- employer situation, the employer must show the following:
- employer did not cause the hazard to exist
- employer did not directly control conditions causing the hazards
- employer has taken reasonable steps to notify the party(s) charged with cause and control of the problem
- employer has taken reasonable steps to keep his/her employees away from the hazard Inspections must be done by a ____person. competent The four steps in conducting a JSA are
- identify job to be examined
- identify steps/ tasks of job
- identify the hazard of each key step
- identify control(s) address each hazard A safety audit is __ in nature while inspections are __ quantitative; qualitative An audit compares actual performance to a set standard OSHA record keeping requirements are contained in 29 CFR ___ , which is a horizontal standard applying to _____ companies regulated by OSHA. 1904; general industry Businesses regulated by OSHA may be exempt from these standards for two reasons, _____ or___ _. size or industry type
1/23/25, 8:22 AM OSHA 510 EXAM NEWEST EXAM 2025 | COMPLETE QUESTIONS AND CORRECT ANSWERS | GRADED A+ | LATEST EXAM |… https://quizlet.com/996351146/osha- 510 - exam-newest-exam- 2025 - complete-questions-and-correct-answers-graded-a-latest-exam-verified-answers… 10 / 12 The OSHA 300A must be certified by a company executive and posted in a prominent location from _____. February 1st to April 30th All records must be maintained for ____ years.
A PLHCP is __ _. physician or other licensed health care professional For a count of days on OSHA forms, ALL calendar days are counted starting the day __ the injury takes place with a cap of _ __ days. after; 180 An injury or illness is an ___ condition or disorder. abnormal Dusts, fumes and mists are measured in weight per unit of volume (mg/m^3) Gasses and Vapors are measured in volume of contaminant per volume of air sampled (ppm) PEL Permissable Exposure Limits TLV Threshold Limit Value TLV-TWA Time Weighted Average and last for 8 hours/day or 40 - hour week TLV-STEL Short-Term Exposure Limit and lasts for few 15 - minute time periods TLV-C Ceiling value and should never be exceeded
1/23/25, 8:22 AM OSHA 510 EXAM NEWEST EXAM 2025 | COMPLETE QUESTIONS AND CORRECT ANSWERS | GRADED A+ | LATEST EXAM |… https://quizlet.com/996351146/osha- 510 - exam-newest-exam- 2025 - complete-questions-and-correct-answers-graded-a-latest-exam-verified-answers-… 11 / 12 The maximum travel distance for any point of the protected area to the nearest fire extinguisher shall not exceed __ 100 feet All hand and power tools, whether paid for by the employer or employee, shall be in a __ safe condition with proper storage and regular maintenance Whenever practicable, all arc welding and cutting operations shall be __ to protect employees and other persons working in the vicinity. shielded Failure to inspect for oil or grease on regulator fittings, valves, or the cap threads on a cylinder of oxygen can result in __ fire or explosion An "Assured equipment grounding conductor program" deals with the cord-set and receptacles which are not part of the __ building's permanent writing
