¡Descarga Turbinas de Gas Kawasaki: Historia, Especificaciones y Aplicaciones y más Apuntes en PDF de Máquinas Térmicas solo en Docsity!
L30A
Kawasaki Heavy Industries, Ltd.
global.kawasaki.com/en/energy/equipment/gas_turbines/index.html
Kawasaki Heavy Industries, Ltd. Tokyo Head Office Tel: +81-3-3435-
Kawasaki Machine Systems, Ltd. Tel: +81-3-3435-
Kawasaki Machine Systems, Ltd. Korea Branch Tel: +82-2-527-
Kawasaki Gas Turbine Asia Sdn Bhd (KGA) Tel: +60-3-7846-
Kawasaki Gas Turbine Europe GmbH (KGE) Tel: +49-6172-7363-
Kawasaki Gas Turbine Service RUS LLC Tel: +7-423-262-
Kawasaki Heavy Industries (Thailand) Co., Ltd. Tel: +66-2-163-
Kawasaki Gas Turbine Asia Sdn Bhd Jakarta Representative Office Tel: +62-21508-
Kawasaki Gas Turbine Europe GmbH, Romanian Representative Office Tel: +40-374 645915
Kawasaki Heavy Industries Management (Shanghai), Ltd. Tel: +86-21-3366-
Kawasaki Energy System Solutions (Shandong) Ltd.
Cat. No. KTK-0001-R Printed in Japan '22-07(71)
ISO 9001 / ISO14001 Certified
The Energy System Division is located at Akashi Works in Japan. It designs and man- ufactures the Gas Turbine Co-generation System, and is certified for ISO 9001, the international standard of quality assurance, and ISO 14001, the international standard for environmental management.
Baseload Model
GPB
M1A-13A GPB15D 1,
531
M1A-13D GPB30D 2, 15,
531
M1T-13D GPB
M1T-13A GPB50D 4, 10,
523
M5A-01D GPB 7, 10,
523
M7A-
GPB180D
L20A-01D Gas Turbine Generator Model
Gas
Engine Series Turbine Model
Maximum Continuos Electric Output kWe Heat Rate kJ/kWe-hr Thermal Efficiency % Exhaust Gas Temperature Exhaust Gas Mass Flow x10 3 kg/hr NOx (0 2 : 15%) ppm Approximate Package Dimension (L,W,H) m Approximate Package Weight (dry) x10 3 kg
GPB17D
GPB
6.0 x 1.9x 2. 14
M1A-17 M1A-17D
1, 12,
522
GPB80D
M7A-03D
17.4 x 3.5 x 3. 155
GPB300D
L30A-01D
8.7 x 2.4 x 3.5 11 x 2.6 x 3.7 14.2 x 4.5 x 5.
M1A Gas Turbine Series M5A Gas Turbine Series M7A Gas Turbine Series L20A Gas Turbine Series L30A Gas Turbine Series
6.0 x 2.4 x 2. 21
5.3 x 1.7 x 2. 14
BASELOAD
Basic Specifications
Note: Mark "D" after Gas Turbine Model stands for Dry Low Emission Condition : ISO Rating 1. Inlet Air Temperature : 15 °C 2. Atmospheric Pressure : 101.3 kPa 3. Inlet / Exhaust Pressure Losses : No Duct Loss
- Fuel Type : Natural Gas (100% CH4) 5. LHV of Fuel : 35.9 MJ/Nm^3
GPB
M1A-13A GPB15D 1,
531
M1A-13D GPB30D 2, 15,
531
M1T-13D GPB
M1T-13A GPB50D 4, 10,
523
M5A-01D GPB 7, 10,
523
M7A-
GPB180D
L20A-01D Gas Turbine Generator Model
Gas
Engine Series Turbine Model
Maximum Continuos Electric Output kWe Heat Rate kJ/kWe-hr Thermal Efficiency % Exhaust Gas Temperature Exhaust Gas Mass Flow x10 3 kg/hr NOx (0 2 : 15%) ppm Approximate Package Dimension (L,W,H) m Approximate Package Weight (dry) x10 3 kg
GPB17D
GPB
6.0 x 1.9x 2. 14
M1A-17 M1A-17D
1, 12,
522
GPB80D
M7A-03D
17.4 x 3.5 x 3. 155
GPB300D
L30A-01D
8.7 x 2.4 x 3.5 11 x 2.6 x 3.7 14.2 x 4.5 x 5.
M1A Gas Turbine Series M5A Gas Turbine Series M7A Gas Turbine Series L20A Gas Turbine Series L30A Gas Turbine Series
6.0 x 2.4 x 2. 21
5.3 x 1.7 x 2. 14
BASELOAD
The Kawasaki GPB Series are designed for baseload application, in both parallel operation with grid and
island mode operation. In addition, Kawasaki GPB Series are able to be operated in co-generation service,
with automatic operation capability supplying both electricity and heat (steam, hot water, direct heat)
by collecting waste heat with a heat recovery system generator(HRSG), heat exchanger, or dryer, and in
Combined Cycle with a steam turbine generator.
With high total thermal efficiency, Kawasaki GPB Series are capable of
saving customer's energy cost and contribute to protect global
environment. After Kawasaki introduced M1A gas turbine to
co-generation market in 1984, Kawasaki has provided
high reliable machines, more than 11,000 units in the world.
Below is Kawasaki gas turbine features,
and is furnished in all units of M1A, M5A,
M7A, L20A, and L30A gas turbines.
1. Self-developed Gas Turbine Fully Made in Japan
Very high quality and reliable various lineup with worldwide installation record.
2. World Highest-Class Efficiency
Kawasaki is proud of the highest efficiency achieved by its own technology.
3. Eco-Friendly
Kawasaki has developed the lowest NOx emission DLE (Dry Low Emission) combustor. With high total
thermal efficiency, Kawasaki gas turbine reduces environmental burden.
4. Fuel Flexibility
Besides natural gas, other fuels such as LNG, off-gas, Kerosene, and diesel oil can be selected as fuel.
5. Reliable After-Service
Reliable after service system is available, which satisfies customer's requirement with on-site engine
exchange program and parts supply system supported by well-experienced service persons.
Removable combustor and inspection holes on gas turbine makes on-site inspection easier.
Kawasaki introduced Single Digit NOx DLE combustor with
M7A-03 gas turbine to the market in 2011.
In many countries and regions, air quality requirement are
getting so strict. This super low NOx technology matches
such market trend.
M5A-01 gas turbine was developed with the latest and
proven technologies of Kawasaki gas turbines, and achieved
highest efficiency as well as least maintenance needs of its
class.
GPB50D utilizing M5A-01D gas turbine provides the optimal
solution for power generation and co-generation.
Its compact package design is also perfect for renewal of
existing facilities.
In 2012, Kawasaki introduced the largest size gas turbine,
L30A, as a flagship model of its industrial gas turbine fleet.
Based on Kawasaki state-of-the-art technology, L30A offers
the highest efficiency of 30MW class gas turbines in the world.
In addition, Kawasaki applied modular system design which
significantly reduces plant down-time and engine overhaul.
L30A is able to provide a highly flexible solution for power
generation and mechanical drive application.
M5A-
L30A-
M7A-
M1A Series Gas Turbine Generator Specifications
M1A/T-13 Series
Standard Package Configuration
M1A-13A Gas Turbine
- Industrial Single-Shaft
- Rotor Speed : 22,000 rpm M1T-13A Gas Turbine
- Twin M1A GT with Combined Gear Box Compressor
- 2 Stage Centrifugal
- Pressure Ratio 9.4:1 (-13A), 9.6:1 (-13D)
- Inlet Guide Vane (IGV) (-13D Option) Combustor
- Single Can Combustor
- Single Ignition
- Conventional Diffusion (-13A)
- Water/Steam Injection to Diffusion Combustor (-13A Option)
- Dry Low Emission (DLE) (-13D)
- Applicable Fuel : Natural Gas, Diesel, Dual Fuel (-13A) Turbine
- 3 Stage Axial Turbine Coupling Shaft & Cover
- Flexible Coupling with Shear Pin and Cover
Reduction Gear Box
- Epicyclic (M1A), Parallel (M1T)
- Output Speed : 1,500 / 1,800 rpm (50/60 Hz) Starting and Turning Motor System
- Variable Frequency Drive (VFD)(M1A)
- Air Starter, DC Motor(M1T)/(M1A Option)
- Turning Motor Lube Oil System
- Lube Oil : Synthetic Ester Oil
- Gearbox Driven Main Lube Pump
- DC Motor Driven Pre-Post Lube Pump
- Air Cooled Oil Cooler with Temp. Control Valve
- Water Cooled Oil Cooler(Option)
- Integral Oil Reservoir : 210 liter (M1A-13A) : 160 liter (M1T-13A)
- Simplex Filter (Option: Duplex Type)
- Oil Mist Separator Generator
- Continuous Duty Rating
- Air Cooled Open Drip-Proof Construction
- 3 Phase, 3 Wire (Option : 4 Wire)
- Standard Voltage : 3.3 kV, 6.6 kV
- Power Factor : 90% (Option : 85%, 80%)Lag
- Bearing : Ball (Roller) Bearing
- Lubrication : Grease Pack
- Exciter : Brushless
Enclosed Package
- Carbon Steel Common Base Frame
- Outdoor Carbon Steel, Acoustic Enclosure
- Noise Level : 85 dBA at 1 m to the side of Enclosure
- Forced Ventilation Fan with Filter and Inlet Screen
- Maintenance Stage, Ladder, Beam Intake Silencer & Filter
- Painted Carbon Steel (Outer Skin and Structure)
- Stainless Steel Inner Punching Metal Sheet
- 2 Stage Filter
- Pulse Type Self Cleaning Filter (Option)
- Noise Level : 85 dBA at 1m from Filter inlet Controls
- Programmable Logic Controller (PLC) (CPU, Power Module : Redundant)
- Gas Turbine and Generator Control GT start / shutdown Control Speed / kW / Power Factor Control Auto Synchronizing and Load Sharing
- Touch Panel Operation
- Ethernet or Serial Communication to DCS/SCADA
- Remote Monitoring (Option) Graphics Monitoring Historical Trend & Event Logger Daily and Monthly Reports
M1A Gas Turbine Series
M1A Gas Turbine Series
M1A-
GPB
M1A-17D
GPB17D
M1A Series
kJ/kWe-hr
kJ/kWe-hr
Site Condition for Normal Performance Elevation above sea level : 0 m Inlet Air Temperature : 15 °C Inlet Air Pressure Loss : 0.98 kPa Exhaust Gas Pressure Loss : 2.45 kPa LHV of Natural Gas Fuel : 35.9 MJ/Nm^3 (100% CH4) Typical Steam Condition Steam Pressure : 0.83 MPaG Steam Temperature (Saturated) : 177 °C Feed Water Temperature : 80 °C Blowdown from HRSG : 0 %
M1A-17 Series
Standard Package Configuration
M1A-17 Gas Turbine
- Industrial Single-Shaft
- Rotor Speed : 22,000 rpm Compressor
- 2 Stage Centrifugal
- Pressure Ratio 10.5:1 (-17,-17D)
- Inlet Guide Vane (IGV) (-17D Option) Combustor
- Single Can Combustor
- Single Ignition
- Conventional Diffusion (-17)
- Dry Low Emission (DLE) (-17D)
- Applicable Fuel : Natural Gas, Diesel, Dual fuel Turbine
- 3 Stage Axial Turbine Coupling Shaft & Cover
- Flexible Coupling with Shear Pin and Cover Reduction Gear Box
- Epicyclic
- Output Speed : 1,500 / 1,800 rpm (50/60 Hz)
Starting and Turning Motor System
- Variable Frequency Drive (VFD)
- (Option : Air Starter, DC Motor)
- Turning Motor Lube Oil System
- Lube Oil : Synthetic Ester Oil
- Gearbox Driven Main Lube Pump
- DC Motor Driven Pre-Post Lube Pump
- Air Cooled Oil Cooler with Temp. Control Valve
- Water Cooled Oil Cooler(Option)
- Integral Oil Reservoir : 240 liter
- Simplex Filter (Option : Duplex Type)
- Oil Mist Separator Generator
- Continuous Duty Rating
- Air Cooled Open Drip-Proof Construction
- 3 Phase, 3 Wire (Option 4 Wire)
- Standard Voltage : 3.3 kV, 6.6 kV
- Power Factor : 90% (Option : 85%, 80%)Lag
- Bearing : Ball (Roller) Bearing
- Lubrication : Grease Pack
- Exciter : Brushless
Enclosed Package
- Carbon Steel Common Base Frame
- Outdoor Carbon Steel, Acoustic Enclosure
- Noise Level : 85 dBA at 1 m to the side of Enclosure
- Forced Ventilation Fan with Filter and Inlet Screen
- Maintenance Stage, Ladder, Beam Intake Silencer & Filter
- Painted Carbon Steel (Outer Skin and Structure)
- Stainless Steel Inner Punching Metal Sheet
- 2 Stage Filter
- Pulse Type Self Cleaning Filter (Option)
- Noise Level : 85 dBA at 1m from Filter inlet Controls
- Programmable Logic Controller (PLC) (CPU, Power Module : Redundant)
- Gas Turbine and Generator Control GT start / shutdown Control Speed / kW / Power Factor Control Auto Synchronizing and Load Sharing
- Touch Panel Operation
- Ethernet or Serial Communication to DCS/SCADA
- Remote Monitoring (Option) Graphics Monitoring Historical Trend & Event Logger Daily and Monthly Reports
5.5 11.
AIR COMPRESSOR & TANK HRSG FEED WATER TANK
GAS VALVE UNIT
GAS TURBINE GENERATOR SET
HRSG
FEED WATER PUMP
CONTROL ROOM
VentilationAir Intake
Ventilation Exhaust
TurbineAir Intake GAS COMPRESSOR
GPB17/17D Typical Package Outlook : m
(Reference)
GPB17/17D Typical Layout : m
(Reference)
L20A Series Gas Turbine Generator Specifications L30A Series Gas Turbine Generator Specifications
GAS TURBINE GENERATOR SET
AIR COMPRESSOR & TANK GAS COMPRESSOR
GAS VALVE UNIT
COOLINGWATER PUMP FEEDWATER PUMP
COOLING TOWER
HRSG
HRSG FEED WATERTANK
Ventilation Exhaust
Ventilation ExhaustGas Outlet Air Inlet
TurbineAir Intake
CONTROL ROOM
L20A Series
Standard Package Configuration
L20A-01 Gas Turbine
- Industrial Single-Shaft
- Rotor Speed : 9,420 rpm Compressor
- 11 Stage Axial Flow
- Pressure Ratio 18.6:
- Inlet Guide Vane (IGV) & 4 Stage Variable Stator Vane (VSV) Combustor
- 8 Can Combustors
- Dual Ignition System
- Dry Low Emission (DLE) (-01D)
- Applicable Fuel : Natural Gas, Diesel *Notes : Diesel is only for standby use Turbine
- 3 Stage Axial Turbine Coupling Shaft & Cover
- Flexible Coupling with Shear Pin and Cover Reduction Gear Box
- Parallel
- Output Speed : 3,000/3,600rpm (50/60Hz)
Starting and Turning System
- Variable Frequency Drive (VFD) Lube Oil System
- Lube Oil : Turbine Oil ISO VG
- Turbine Driven Main Lube Oil Pump
- AC Motor Driven Pre-Post Lube Pump
- DC Motor Driven Emergency Post Lube Pump
- Water Cooled Oil Cooler with Temp. Control Valve
- Integral Oil Reservoir : 5,900 liter
- Oil Heater
- Duplex Filter
- Oil Vapor Fan Generator
- Continuous Duty Rating
- Water Cooled
- 3 Phase, 3 Wire (Option : 4 Wire)
- Standard Voltage : 6.6 kV, 11.0 kV
- Power Factor : 85%Lag
- Bearing : Sleeve Bearing
- Lubrication : Forced Oil Lubrication
- Exciter : Brushless Enclosed Package
- Carbon Steel Common Base Frame
- Painted Carbon Steel Acoustic Enclosure
- Noise Level : 85 dBA at 1 m to the side of Enclosure
- Forced Ventilation Fan with Filter and Inlet Screen
- Maintenance Stage, Ladder, Beam Intake Silencer & Filter
- Painted Carbon Steel (Outer Skin and Structure)
- Stainless Steel Inner Punching Metal Sheet
- 3 Stage Filter
- Pulse Type Self Cleaning Filter (Option)
- Noise Level : 85 dBA at 1 m from Filter inlet Controls
- Programmable Logic Controller (PLC) (CPU, Power Module : Redundant)
- Gas Turbine and Generator Control GT start / Shutdown Control Speed / kW / Power Factor Control Auto Synchronizing and Load Sharing
- Touch Panel Operation
- Ethernet or Serial Communication to DCS/SCADA
- Remote Monitoring (Option) Graphics Monitoring Historical Trend & Event Logger Daily and Monthly Reports
M7A/L20A Series
L20A Gas Turbine Series
L30A Gas Turbine Series
L20A-01/01D L30A-01/01D
GPB300 / 300D
Site Condition for Normal Performance Elevation above sea level : 0 m Inlet Air Temperature : 15 °C Inlet Air Pressure Loss : 0.98 kPa Exhaust Gas Pressure Loss : 3.43 kPa LHV of Natural Gas Fuel : 35.9 MJ/Nm^3 (100% CH4) Typical Steam Condition Steam Pressure : 0.83 MPaG Steam Temperature (Saturated) : 177 °C Feed Water Temperature : 80 °C Blowdown from HRSG : 0 %
GPB180/180D Typical Package Outlook : m
(Reference)
L30A Series
Standard Package Configuration
L30A-01 Gas Turbine
- Industrial Twin-Shaft
- Power Turbine Rotor Speed : 5,600 rpm Compressor
- 14 Stage Axial Flow
- Pressure Ratio 24.9:
- Inlet Guide Vane (IGV) & 4 Stage Variable Stator Vane (VSV) Combustor
- 8 Can Combustors
- Dual Ignition System
- Conventional Diffusion (-01) (Option De-NOx : Steam Injection)
- Dry Low Emission (DLE) (-01D)
- Applicable Fuel : Natural Gas, Diesel *Notes : Diesel is only for standby use Turbine
- Gas Generator Turbine : 2 Stage Axial Turbine
- Power Turbine : 3 Stage Axial Turbine Coupling Shaft & Cover
- Flexible Coupling with Shear Pin and Cover
Reduction Gear Box
- Parallel
- Output Speed : 1,500/1,800rpm (50/60Hz) Starting and Turning System
- Variable Frequency Drive (VFD) Lube Oil System
- Lube Oil : Turbine Oil ISO VG32 (optional VG46)
- Motor Driven Lube Oil Pump
- Water Cooled Oil Cooler with Temp. Control Valve
- Integral Oil Reservoir : 11,700 liter
- Duplex Filter
- Oil Vapor Fan Generator
- Continuous Duty Rating
- Water Cooled (Option : Air-to-Air Cooled)
- 3 Phase, 3 Wire (Option : 4 Wire)
- Standard Voltage : 11.0 kV
- Power Factor : 90% (Option : 85%, 80%) Lag
- Bearing : Sleeve Bearing
- Lubrication : Forced Oil Lubrication
- Exciter : Brushless Enclosed Package
- Carbon Steel Common Base Frame
- Painted Carbon Steel Acoustic Enclosure
- Noise Level : 85 dBA at 1 m to the side of Enclosure
- (^) Forced Ventilation Fan with Filter and Inlet Screen
- Maintenance Stage, Ladder, Beam Intake Silencer & Filter
- Painted Carbon Steel (Outer Skin and Structure)
- Stainless Steel Inner Punching Metal Sheet
- 3 Stage Filter
- Pulse Type Self Cleaning Filter (Option)
- Noise Level : 85 dBA at 1 m from Filter inlet Controls
- Programmable Logic Controller (PLC) (CPU, Power Module : Redundant)
- Gas Turbine and Generator Control GT start / Shutdown Control Speed / kW / Power Factor Control Auto Synchronizing and Load Sharing
- Touch Panel Operation
- Ethernet or Serial Communication to DCS/SCADA
- Remote Monitoring (Option) Graphics Monitoring Historical Trend & Event Logger Daily and Monthly Reports
M7A/L20A Series
L20A Gas Turbine Series
L30A Gas Turbine Series
L20A-01/01D L30A-01/01D
GPB300 / 300D
Site Condition for Normal Performance Elevation above sea level : 0 m Inlet Air Temperature : 15 °C Inlet Air Pressure Loss : 0.98 kPa Exhaust Gas Pressure Loss : 3.43 kPa LHV of Natural Gas Fuel : 35.9 MJ/Nm^3 (100% CH4) Typical Steam Condition Steam Pressure : 0.83 MPaG Steam Temperature (Saturated) : 177 °C Feed Water Temperature : 80 °C Blowdown from HRSG : 0 %
Ventilation Air Inlet
Ventilation Exhaust
Turbine Air Intake
GPB
AIR COMPRESSOR & TANKCONTROL ROOM
ELECTRICAL ROOM TRANSFORMERYARD
GAS TURBINE
GENERATOR
SET
GAS COMPRESSOR
COOLINGGAS VALVE UNIT WATERPUMP
HRSG FEED WATERPUMP HRSG
HRSG FEED WATERTANK
COOLING TOWER
GPB300/300D Typical Package Outlook : m
(Reference)
GPB180/180D Typical Layout : m
(Reference)
GPB300/300D Typical Layout : m
(Reference)
Kawasaki Techno-Net Installation Examples
Full Time Support
Maintenance Management
Predictive services based on trending data and asset maintenance management
What to do When to do it How to do it Who's to do it
Improvement of Availability and Quality of Maintenance
Minimum down time and good quality with adequate maintenance strategies and execution.
Remote Maintenance System by a GT Expert
Proven effectiveness by most Kawasaki remote maintenance users
Fleet wide analysis
Three main features of Techno-Net system
Global remote monitoring
Techno-Net system continuously monitors
the Gas Turbine Plant in any region of the world
Preventing serious failures Maintenance management
Remote monitoring through the internet Enforced monitoring and diagnosis Adequate management of maintenance
Connection of centers through the internet
Communications through the telephone net / internet
between customer and the centers
Internet / Intranet
Attended monitoring
The Kawasaki World Business Center in the USA, Germany, Malaysia, China, Korea and Japan are connected
by the Internet and by the KHI intranet to monitor gas turbines remotely and globally.
All system data is monitored and recorded hourly, as well as all start signals and first out malfunction signals.
Predictive and preventative maintenance is accomplished by analysis of thermal cycles and unit vibration.
Kawasaki Gas Turbine has been installed to....
● Data Center^ ● Paper Mill^ ● Hospital
● Food Process^ ● College Campus^ ● Oil & Gas
● Tire Manufacturer^ ● District Heat & Cooling^ AND MORE !!!
GPB15D USA GPB30 SOUTH KOREA GPS4000 USA
GPB80D MALAYSIA
GPB80D ITALY
GPB180 PORTUGAL
GPB80D FRANCE GPB80D ITALY
GPB180D MALAYSIA
M1 Series
GPB180 JAPAN GPB300 JAPAN
L30 Series
M7 Series
L20 Series
M5 Series Coming Soon!
In 2010 Kawasaki accumulated 10,000th Kawasaki Gas Turbine Engines
in all over the world !!!
